xnord19 Posted May 19, 2022 Posted May 19, 2022 On 5/16/2022 at 2:49 PM, cciepro said: The answer should be B, as Layer 3 switch, or multilayer switch, can do all the job of a layer 2 switch and additional static routing and dynamic routing as well. it is mentioned that he L-3 switches are connected by routed links, which is L3 links, so BFD is the answer. If the links were L2, then UDLD would be used 1
kayssar Posted May 19, 2022 Posted May 19, 2022 4 minutes ago, xnord19 said: I`m confused between the fist 2 top boxes on the right side, they both seem as "performance Management" what do you guys think ? usage stats is accounting no performance 2
Popular Post xnord19 Posted May 19, 2022 Popular Post Posted May 19, 2022 37 minutes ago, kayssar said: usage stats is accounting no performance True, Thanks I found this link where they are explained briefly in a good way This is the hidden content, please Sign In or Sign Up 78 13 1 1
Popular Post Lisaray Posted May 20, 2022 Popular Post Posted May 20, 2022 (edited) I confirm , It is valid , Thanks to Keje , dumps helped a lot. Also looking for dumps 350-501 , Please share if you have This is the hidden content, please Sign In or Sign Up This is the hidden content, please Sign In or Sign Up Edited May 20, 2022 by Lisaray attached 98 18 2 1
labnet Posted May 21, 2022 Posted May 21, 2022 On 5/19/2022 at 7:34 AM, xnord19 said: I`m confused between the fist 2 top boxes on the right side, they both seem as "performance Management" what do you guys think ? 4
xnord19 Posted May 21, 2022 Posted May 21, 2022 passed the exam yesterday. the dump is 100% valid Thanks to everyone helping out here and special thanks to @kejeI wouldn´t pass without your help 🙂 1 1
ozziejat Posted May 23, 2022 Posted May 23, 2022 Hi All, Appeared for the exam and passed with over 800+ mark. Please prepare VCE file uploaded by KEJE on 14th May to pass CCDE written. FYI - All Qs were from VCE file, no single question was asked outside of the VCE. ALL THE BEST !!! 1 1
ozziejat Posted May 23, 2022 Posted May 23, 2022 16 minutes ago, martek said: CONGRATS !!! Did you take exam today Monday ? OR last week (it could be important as they may issue new rotation on Mondays. Monday !!! 2 1
manhunt2k Posted May 23, 2022 Posted May 23, 2022 On 5/20/2022 at 5:20 PM, Lisaray said: I confirm , It is valid , Thanks to Keje , dumps helped a lot. Also looking for dumps 350-501 , Please share if you have This is the hidden content, please Sign In or Sign Up This is the hidden content, please Sign In or Sign Up 2 hours ago, ozziejat said: Hi All, Appeared for the exam and passed with over 800+ mark. Please prepare VCE file uploaded by KEJE on 14th May to pass CCDE written. FYI - All Qs were from VCE file, no single question was asked outside of the VCE. ALL THE BEST !!! 1 hour ago, martek said: CONGRATS !!! Did you take exam today Monday ? OR last week (it could be important as they may issue new rotation on Mondays. 49 minutes ago, ozziejat said: Monday !!! Took exam recently, still valid and gotten 8xx score pass, somehow less than 20 questions answers are incorrect . Thank you all for your help. 6 2
manhunt2k Posted May 23, 2022 Posted May 23, 2022 Just now, manhunt2k said: Took exam recently, still valid and gotten 8xx score pass, somehow less than 20 questions answers are incorrect . Thank you all for your help. Saw others taking 350-401 encore has few simulation questions eg login ssh and configure router 1
ozziejat Posted May 23, 2022 Posted May 23, 2022 Just confirming CCDE written is enough to renew CCIE certification ? Thanks 1
Wantccie Posted May 23, 2022 Posted May 23, 2022 On 5/19/2022 at 11:40 AM, jalocha said: passed today. 831 points. dump is valid. enough to pass. i selected "traffic shaping" answer for DaaS question, and "successfully, no RPF check" for multicast. Hi, If 760 points we need to pass exam, 831 we get with this dumps, one question about 10 points. We have stock/reserve about max. 7 question. We have about 17 bad answer. - It's a lot. Thanks. 1
daywalker Posted May 24, 2022 Posted May 24, 2022 13 hours ago, Wantccie said: Hi, If 760 points we need to pass exam, 831 we get with this dumps, one question about 10 points. We have stock/reserve about max. 7 question. We have about 17 bad answer. - It's a lot. Thanks. I have Exam day after tomorrow , kindly if there anyone can help me with the wrong questions , will be much appreciated .Looking to pass guys . Thank you all 1
manhunt2k Posted May 24, 2022 Posted May 24, 2022 17 hours ago, Wantccie said: Hi, If 760 points we need to pass exam, 831 we get with this dumps, one question about 10 points. We have stock/reserve about max. 7 question. We have about 17 bad answer. - It's a lot. Thanks. 3 hours ago, daywalker said: I have Exam day after tomorrow , kindly if there anyone can help me with the wrong questions , will be much appreciated .Looking to pass guys . Thank you all Here you go to decipher which questions has incorrect answers. Hope it helps on performance of each sections. Business Strategy Design 80% Control, data, and management plane design 88% Network Design 73% Service Design 60% Security Design 60% 1
keje Posted May 24, 2022 Author Posted May 24, 2022 19 hours ago, Wantccie said: Hi, If 760 points we need to pass exam, 831 we get with this dumps, one question about 10 points. We have stock/reserve about max. 7 question. We have about 17 bad answer. - It's a lot. Thanks. thats incorrect , you need 767 that is bare minimum 1
ieee Posted May 24, 2022 Posted May 24, 2022 How many fully established neighbor relationships exist on an Ethernet with five routers running OSPF as network type broadcast? A. 10 B. 6 C. 5 D. 20 E. 7 ans should be 7 1
keje Posted May 24, 2022 Author Posted May 24, 2022 32 minutes ago, ieee said: How many fully established neighbor relationships exist on an Ethernet with five routers running OSPF as network type broadcast? A. 10 B. 6 C. 5 D. 20 E. 7 ans should be 7 if your using the last updated file i uploaded it was corrected to 7 1
Wantccie Posted May 24, 2022 Posted May 24, 2022 Hi, Q95 -> IPv4 Router registration PIM-SM,SSM,BIDIR or PIM-DM,PIM-SM,SSM,BIDIR ? Thanks 1
keje Posted May 25, 2022 Author Posted May 25, 2022 3 hours ago, Wantccie said: Hi, Q95 -> IPv4 Router registration PIM-SM,SSM,BIDIR or PIM-DM,PIM-SM,SSM,BIDIR ? Thanks PIM-DM is only available with IPv4 and is not available in IPv6 2
ieee Posted May 25, 2022 Posted May 25, 2022 6 hours ago, keje said: if your using the last updated file i uploaded it was corrected to 7 thanks keje, can you pls share the latest file of your modified vce file 1
daywalker Posted May 25, 2022 Posted May 25, 2022 3 hours ago, keje said: PIM-DM is only available with IPv4 and is not available in IPv6 Kindly share you latest vce version with corrections, appreciate your kindness , my exam is tomorrow .Thanks 1
Wantccie Posted May 25, 2022 Posted May 25, 2022 keje -> PIM-DM is only available with IPv4 and is not available in IPv6 Hi, You don't answer for my question. You answer is for Q97, but I ask for Q95. Q95 -> IPv4 Router registration PIM-SM,SSM,BIDIR or PIM-DM,PIM-SM,SSM,BIDIR ? 1
dyoll Posted May 26, 2022 Posted May 26, 2022 On 5/23/2022 at 8:36 PM, martek said: Yes ! how many days will your CCIE be renewed once you pass the CCDE written?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now