thawng Posted March 24, 2023 Share Posted March 24, 2023 On 3/18/2023 at 1:24 AM, KANS said: My exam is at mid of April me at end of April. What your thought about cisco announced changes on Sept 20? Link to comment Share on other sites More sharing options...
Himura Posted March 31, 2023 Share Posted March 31, 2023 On 3/18/2023 at 6:27 PM, visasman said: NO change in DES questions at all locations.... Even the vendors have not confirmed this. If anyone still claims there are changes in the DES questions, please share them with proof, otherwise say nothing. Thanks for sharing. Could you send us the DES Q that you used ?? Regards Link to comment Share on other sites More sharing options...
KANS Posted April 7, 2023 Share Posted April 7, 2023 any update from Dubai? Link to comment Share on other sites More sharing options...
Popular Post zeMas Posted April 7, 2023 Popular Post Share Posted April 7, 2023 Hi Team I cannot share obvious proof of the design changes but can share for sure that Design changed in Brussels and RTP - in Dubain, no changes. The Lab is the same but the design changed - up to 16 new questions, some old questions were added and new questions such as these: Diff between Flexvpn and DMVPN IPV6 - 2 new questions with multiple selection MSDP and multicast new questions Unfortunetly for me I can tell is true since I fail becouse of that - Dubai I know a person who was there this week - no changes on the design and passed - he got lucky because sooner or later the questions will change If you schedule to Brussels you will face the changes and at that day I was with 4 other guys - I can tell that I took 2h20 to finish the Design and I was the first to start typing - going to Lab Section - and the first to leave - most likely they also got the new question by surprise and were in trouble I don´t believe that the exam did not changed for these guys and just changed for me or they would be doing the Design before me for sure - this was my 2 attemp and I only took maybe 1 hour to take the Design the first time that I passed - the questions were the same. If anyone pass or receive an update please share - I will share a doc with the new questions and right anwser. NOTE: These are questions that I took note when I left the exam + testemony of 2 other persons who went to the exam and also got screwed Please note that the question might be incomplete and also the answer might not be correct- because we don´t have the full question confirmation What is default timers in BFD in SD-WAN? Answer: Hello every 1 second, and multiplier 7. When configuring multicast to automatically advertise the identity of the RPs, which protocol takes precedence? Answers: AutoRP BSR Static RP Anycast RP MSDP Is the information in the TLOC visible only in the underlay, overlay or both? Answers: Only visible in the Overlay Only visible in the Underlay Visible in Both They want to put IaaS in area 300 and branches in area 400 and they want that branches will only get inter-area routes and not external routes. Which area fits best? (two options) Answers: Stub NSSA NSSA totally stub Regular Totally stub They configured ERSPAN (switchport analyzer) in IaaS. The source is IaaS and the receiver is the DC (the other side that gets the information). The reason is to debug a technical malfunction in the application in IaaS and they want to show that the network between IaaS and DC is not the problem. The timestamp is not precise enough. What can we do to improve the timestamp of this monitor? Take into account that we already configured PTP in IaaS. Answers: ERSPAN v2 (ERSPAN type III) P2P all accrose the DC Connect to stratum source 3 Configure NTP in IaaS Switch 300 Configure NTP in the DC There's virtual machines in ESX and when we migrate from one ESX to another, everything stops working (IP protocols and none-IP protocols). What are 2 reasons for this to happen? Answers: Port Security Static Mac Address Dynamic ARP inspection CLI config of PE6, shows that RD + RT import-export is configured. BGP neighborship to R62 looks good. no other devices have CLI configs to see. a new email also available email says that R62 is receiving partial routing information while R62 is receiving all routes properly. that R3, the RR, is receiving from R21 at DC is received but routes from the the other branch (or from R61?) is not received by R62 (R6 also does not see the mentioned routes) what is most likely the reason for this? (single choice) Answers: A. route-reflector settings on R3 (the RR) B. Unique RTs need to be Configured C. same RD need to be configured probably one more option was there Travis wants to suppress specific prefix in ipv6, the question is how to do it. He wants to keep sending RA without sending the prefix information. He doesn't want anyone to eavesdrop and get company data. He also wants to have stateful ipv6. Choose three commands. Answers (some commands are not correct on purpose): IPv6 nd prefix default no-advertise Ipv6 nd prefix default [number] [number] no-autoconfig Ipv6 nd managed-config-flag Ipv6 nd default suppress prefix (command might be: ipv6 nd ra suppress) Ipv6 nd dhcp v6 stateful There is another command with the word Autonomous, which doesn't exist. They ask for switches configuration that will be simple, fast and with load balancing. Choose 2 answers. Answers: Use vtp to configure the rstp Change spanning tree timer value Something with MSTP Split the role of the root bridge A question with Filter-list and virtual link. The mail says that everything is in area 0. They put distribute list in switch 201+202 and they don't understand why R23 still see those routes. Answer: Distribute list only affects RIB (and not OSPF database) We want two RPs (active-active or active-passive), how would you do it with redundancy to RPs? Very important to have smooth user experience. MSDP a. Travis said: I prefer standard protocol, but I'll use none-standard if there's a good reason for it, and he's going to use SDWAN in the future and wants sub seconds convergence. They also want option for fast failover if something doesn't work, and transparent to end users. Which one is preferred according to what Travis asked? Because he prefers not proprietary, the answer seems like "VRRP Only". b. What supports sub seconds failover (it's also part of the table)? VRRP, HSRP, GLBP Check if this question was there ***** Given the requirement, what would be the best way to implement the logging on r21? Use a Python script to access the router CLI remotely through SSH and drive the output collection Is the information in the TLOC visible only in the underlay, overlay or both? Answers: Only visible in the Overlay Only visible in the Underlay Visible in Both Email from ANA. We have new SD-WAN branches. In each branch, we have connection to 2 ISP and she wants to check the redundancy. She disconnected one of the lines on purpose and totally lost connection to the branch. She wants redundancy. What should she do? Answers: Redistribute OMP into BGP or BGP to OMP Configure vSmart policy with the site id of the DC Configure vSmart policy with the site id of the Branches This is the hidden content, please Sign In or Sign Up So check the questions and study so that at the exam you can read and know the right anwer! 56 13 2 Link to comment Share on other sites More sharing options...
KANS Posted April 8, 2023 Share Posted April 8, 2023 Thanks a lot @zeMas Can u please share the attachment again.is it same as what you wrote in the message? Link to comment Share on other sites More sharing options...
Popular Post zeMas Posted April 10, 2023 Popular Post Share Posted April 10, 2023 Here are the questions and right answer Note: These were colelcted by people and myself - however we cannot entire sure about the question, we debate and the questions are there but we may overlooked something The goal is to help everyone to know what will find and prepare him self better The same goes the other way around - if you go to the exam or receive any update from Spoto, CLC or Chinese, please unicast me or share here I-m planning to retake the exam 2th on late May so I would also need your help -- Good luck to all This is the hidden content, please Sign In or Sign Up 65 13 1 Link to comment Share on other sites More sharing options...
zshengh Posted April 10, 2023 Share Posted April 10, 2023 thanks Link to comment Share on other sites More sharing options...
mindset Posted April 12, 2023 Share Posted April 12, 2023 Thanks for sharing Link to comment Share on other sites More sharing options...
ShoIProute Posted April 20, 2023 Share Posted April 20, 2023 On 4/18/2023 at 10:43 AM, anotherccie said: on question When configuring multicast to automatically advertise the identity of the RPs, which protocol takes precedence? you said bsr are you sure ? is it not auto rp ? got a link ? I think I finally found the link. And it looks like the answer is Auto RP: This is the hidden content, please Sign In or Sign Up 30 5 Link to comment Share on other sites More sharing options...
zeMas Posted April 20, 2023 Share Posted April 20, 2023 great stuff thanks a lot for your cross checking 1 Link to comment Share on other sites More sharing options...
takak Posted April 21, 2023 Share Posted April 21, 2023 thx! 1 Link to comment Share on other sites More sharing options...
aceHossy Posted April 21, 2023 Share Posted April 21, 2023 thanks for the info 1 Link to comment Share on other sites More sharing options...
maxdieng Posted April 23, 2023 Share Posted April 23, 2023 Hello Link to comment Share on other sites More sharing options...
Amro Posted April 26, 2023 Share Posted April 26, 2023 On 4/10/2023 at 11:55 PM, zeMas said: Here are the questions and right answer Note: These were colelcted by people and myself - however we cannot entire sure about the question, we debate and the questions are there but we may overlooked something The goal is to help everyone to know what will find and prepare him self better The same goes the other way around - if you go to the exam or receive any update from Spoto, CLC or Chinese, please unicast me or share here I-m planning to retake the exam 2th on late May so I would also need your help -- Good luck to all This is the hidden content, please Sign In or Sign Up Dear, Where you take exam last time ? 14 1 Link to comment Share on other sites More sharing options...
dds69 Posted May 2, 2023 Share Posted May 2, 2023 (edited) Thanks ! Hope you pass today Edited May 2, 2023 by dds69 Link to comment Share on other sites More sharing options...
Lakhinder Posted May 4, 2023 Share Posted May 4, 2023 Ta Link to comment Share on other sites More sharing options...
Rocket47 Posted May 4, 2023 Share Posted May 4, 2023 On 5/2/2023 at 1:09 PM, dds69 said: Thanks ! Hope you pass today Hi. how did it go? Any changes? Link to comment Share on other sites More sharing options...
NTWMaster Posted May 5, 2023 Share Posted May 5, 2023 (edited) On 4/10/2023 at 4:55 PM, zeMas said: Here are the questions and right answer Note: These were colelcted by people and myself - however we cannot entire sure about the question, we debate and the questions are there but we may overlooked something The goal is to help everyone to know what will find and prepare him self better The same goes the other way around - if you go to the exam or receive any update from Spoto, CLC or Chinese, please unicast me or share here I-m planning to retake the exam 2th on late May so I would also need your help -- Good luck to all This is the hidden content, please Sign In or Sign Up I attempted to message you, but my account will not allow it. I know it isn't much, but I have one more question to add because I have sat the lab. It is one of those select all that apply. I would post it here, but it seems so many are only interested in getting the information and not supplying it. Again, it is just question but every question helps, right? Edited May 8, 2023 by NTWMaster 4 2 Link to comment Share on other sites More sharing options...
NTWMaster Posted May 6, 2023 Share Posted May 6, 2023 (edited) . Edited May 6, 2023 by NTWMaster Link to comment Share on other sites More sharing options...
NTWMaster Posted May 6, 2023 Share Posted May 6, 2023 9 hours ago, anotherccie said: So why dont you post it here ? You got the file for free so contribute... Yes. From zemas and since they have posted, I have not seen anyone share anything. They asked for help in return and I have yet to see it. I've also posted helpful information, like videos (I removed the videos), for questions I've specifically seen and people just react to get it. There doesn't seem to be give and take here like it appears there was in the past. Even the smallest piece of information could hlep others, but no. Just reacts. Zemas shared THEIR information, which I am thankful for, but if the "community" is only going to just take, I will personally share with those who are actually trying to help others. You sound entitled. 1 Link to comment Share on other sites More sharing options...
Loungelizz Posted May 6, 2023 Share Posted May 6, 2023 5 hours ago, NTWMaster said: Yes. From zemas and since they have posted, I have not seen anyone share anything. They asked for help in return and I have yet to see it. I've also posted helpful information, like videos (I removed the videos), for questions I've specifically seen and people just react to get it. There doesn't seem to be give and take here like it appears there was in the past. Even the smallest piece of information could hlep others, but no. Just reacts. Zemas shared THEIR information, which I am thankful for, but if the "community" is only going to just take, I will personally share with those who are actually trying to help others. You sound entitled. Be great if you could share. Thanks in advance Link to comment Share on other sites More sharing options...
pentacis Posted May 8, 2023 Share Posted May 8, 2023 On 4/10/2023 at 11:55 PM, zeMas said: Here are the questions and right answer Note: These were colelcted by people and myself - however we cannot entire sure about the question, we debate and the questions are there but we may overlooked something The goal is to help everyone to know what will find and prepare him self better The same goes the other way around - if you go to the exam or receive any update from Spoto, CLC or Chinese, please unicast me or share here I-m planning to retake the exam 2th on late May so I would also need your help -- Good luck to all This is the hidden content, please Sign In or Sign Up Bro what happened to May attempt? did you make it or postponed ? if i may ask of course my attempt is at the end of this months, so any tip is helpful, and i haven't seen any DES update but yours so thanks for that... 14 2 Link to comment Share on other sites More sharing options...
Russ Posted May 10, 2023 Share Posted May 10, 2023 thanks Link to comment Share on other sites More sharing options...
Ashoo Posted May 20, 2023 Share Posted May 20, 2023 Hi Link to comment Share on other sites More sharing options...
konto Posted June 11, 2023 Share Posted June 11, 2023 (edited) Just took the exam earlier this month and i could confirm no new question in Design Edited June 13, 2023 by konto 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now