[offer]Labworkbook RE-UP !! MEGA LAB - CCNA refresh/CCNP - real enterprise situation

[kechik]

hi,

 

appreciate someone share the .unl file.

 

Thanks

[rugo]

thank you

[Quinster56]

😀

[shawarma]

TY!!

[anggoro2778]

mm

[CosminR]

thx!

[shawarma]

TY!!

[mechawolfxx]

Can someone post the .unl/eve-ng file

[mechawolfxx]

On 11/29/2022 at 11:45 PM, jedyou said:

hi guys,

Very nice lab here for refresh ccna skill gap to ccnp

real situation enterprise (configuration dhcp server, infoblox, routing; bgp,ospf static floating route, eigrp. sec : port sec dai inspection / lan vlan, stp(mst,rstp, stp)  and more

download fast please i kill the link next week 

 

LAB1: Configuration Datacenter connectivity and resiliency ....................................................... 7 Objectives on this lab ................................................................................................................... 7 TASK 1: Configure the hostnames and all interfaces (cf above table). ............................ 8 TASK 2: Configure the ip address of server Automation...................................................... 8 TASK 3: configure vlan 2,3, 400, and 500 on the switches: SW-DC1 & SW-DC2........ 8 TASK 4: configure interface vlan for vlan 2,3,400 and 500 (cf table). ........................... 8 TASK 5: configure the uplink trunk port between the switches .......................................... 8 TASK 6: configure the access port on the switches DC1 and DC2 : .................................. 8 TASK 7: configure Spanning tree DC1/DC2 : .......................................................................... 9 TASK8: Configure the REAL dhcp server ................................................................................. 9 TASK9: Configure OSPF between uplink DC to internet routers ....................................... 10 TASK10 : Configure INTERNET routers (DYNAMIQUE NAT Overload ) ....................... 12 TASK11 : Configure Redistribution default route ................................................................. 12 TASK12: Configure resiliency for vlan server........................................................................ 12 LAB2: Configuration MAN connectivity and resiliency .............................................................. 33 Objectives on this lab ................................................................................................................. 33 Task1: configure the vlans and the interface vlan on sw-CP1 and SW-CP3................... 34 Task2: configure ip address for host 1 and host2 ............................................................... 34

Task3: Configure SW-CP1’s G0/0, G0/1 interfaces to form a LACP EtherChannel with Sw-CP2 (po2) ................................................................................................................................ 34

Task4: Configure SW-CP2’s G0/2, G0/3 interfaces to form a LACP EtherChannel with Sw-CP2(po3).................................................................................................................................. 34

Task5: configure HSRP with authentication for the vlan 100 and 200 ............................ 34 [email protected]

Task6 configure RSTP for the vlan 200 and 100. ................................................................ 34 Task7 configure ospf routing and redistribute ...................................................................... 34 Task8 configure DAI and DHCP snooping ................................................................................ 34 Task9 Test connectivity to internet from host 1 and host2 to internet. ........................ 35

LAB3: Configuration WAN connectivity and BGP Routes........................................................... 46

Objectives on this lab ................................................................................................................. 46 Task1: configure the interface of all routers (cf table above)........................................ 48 Task2: Configure OSPF between all routers .......................................................................... 48 Task3: Configure eBGP ............................................................................................................... 48 Task4: Configure iBGP ................................................................................................................ 49 Task5: Configure iBGP route-reflector (ccnp level).............................................................. 49 Task6: Configure VRRP between CE1 and CE2....................................................................... 49

LAB4: SITE 1 ............................................................................................................................ 58

Objectives on this lab and what you will learn:..................................................................... 58 Task1: configureallinterfaces(cftableabove).................................................................60 Task2: Configure the WAN CE-10 .......................................................................................... 60 Task3: Enable and configure CDP ............................................................................................. 60 Task4: Configure spanning tree................................................................................................. 60 Task5: Configure port security ................................................................................................. 60

LAB5: SITE 2 ............................................................................................................................ 66

Objectives on this lab and what you will learn : ................................................................... 66 Task1: configureallinterfaces(cftableabove).................................................................69 Task2: Configure the WAN CE1-20 ........................................................................................ 69 Task2: Configure the WAN CE2-20 ........................................................................................ 69 Task4: Configure ibgp back to back......................................................................................... 69 Task5: Configure Hsrp lan ......................................................................................................... 69 Task6: Configure Spanning tree mst ........................................................................................ 69 Task7: check and Configure resiliency..................................................................................... 70 Task8: Configure QOS and apply them outbound on interface G0/3 ................................ 70

LAB6: SITE 3 ............................................................................................................................ 82

Objectives on this lab ................................................................................................................. 82 Task1: configureallinterfaces(cftableabove).................................................................84

[email protected]

Task2: Configure the WAN CE1-30 ........................................................................................ 84 Task3: Configure the WAN CE2-30 ........................................................................................ 84 Task4: Enable and configure EIGRP......................................................................................... 84 Task4: Configuration floating static route ............................................................................. 84 Task5: check the first resiliency ............................................................................................. 85 Task6: Configure ibgp peering................................................................................................... 85 Task7: check the second resiliency.......................................................................................... 86 Task1: configureallinterfaces(cftableabove).................................................................87 Task2: Configure the WAN CE1-30 ........................................................................................ 87 Task3: Configure the WAN CE2-30 ........................................................................................ 87 Task4: Enable and configure EIGRP......................................................................................... 88 Task4: Configuration floating static route ............................................................................. 89 Task5: check the first resiliency ............................................................................................. 90 Task6: Configure ibgp peering................................................................................................... 90 Task7: check the second resiliency.......................................................................................... 92

LAB7 SITE 4 (CCNA /CCNP SEC) ................................................................................................. 94

Objectives on this lab ................................................................................................................. 94 Task1: configureallinterfaces(cftableabove).................................................................95 Task2: Configure IPSEC ............................................................................................................. 95 Task3: Verify the connectivity ................................................................................................. 97

LAB8 SITE 5 (CCNA SEC /CCNP SEC) - Soon .............................................................................. 112

Objectives on this lab............................................................................................................... 112

 

A+ guys

 

 

Hidden Content

•   

 

[hide][/hide]

 

 

can you share the eve-ng link please?

[syedhaseeb78]

hi

[caspero]

thank you

[caspero]

Thank's 

[shankmu22]

Did anyone get the .unl file. Please reup if you have it.

 

Thanks in advance!!

[KAOUTIKHALIL]

On 11/30/2022 at 5:45 AM, jedyou said:

hi guys,

Very nice lab here for refresh ccna skill gap to ccnp

real situation enterprise (configuration dhcp server, infoblox, routing; bgp,ospf static floating route, eigrp. sec : port sec dai inspection / lan vlan, stp(mst,rstp, stp)  and more

download fast please i kill the link next week 

 

LAB1: Configuration Datacenter connectivity and resiliency ....................................................... 7 Objectives on this lab ................................................................................................................... 7 TASK 1: Configure the hostnames and all interfaces (cf above table). ............................ 8 TASK 2: Configure the ip address of server Automation...................................................... 8 TASK 3: configure vlan 2,3, 400, and 500 on the switches: SW-DC1 & SW-DC2........ 8 TASK 4: configure interface vlan for vlan 2,3,400 and 500 (cf table). ........................... 8 TASK 5: configure the uplink trunk port between the switches .......................................... 8 TASK 6: configure the access port on the switches DC1 and DC2 : .................................. 8 TASK 7: configure Spanning tree DC1/DC2 : .......................................................................... 9 TASK8: Configure the REAL dhcp server ................................................................................. 9 TASK9: Configure OSPF between uplink DC to internet routers ....................................... 10 TASK10 : Configure INTERNET routers (DYNAMIQUE NAT Overload ) ....................... 12 TASK11 : Configure Redistribution default route ................................................................. 12 TASK12: Configure resiliency for vlan server........................................................................ 12 LAB2: Configuration MAN connectivity and resiliency .............................................................. 33 Objectives on this lab ................................................................................................................. 33 Task1: configure the vlans and the interface vlan on sw-CP1 and SW-CP3................... 34 Task2: configure ip address for host 1 and host2 ............................................................... 34

Task3: Configure SW-CP1’s G0/0, G0/1 interfaces to form a LACP EtherChannel with Sw-CP2 (po2) ................................................................................................................................ 34

Task4: Configure SW-CP2’s G0/2, G0/3 interfaces to form a LACP EtherChannel with Sw-CP2(po3).................................................................................................................................. 34

Task5: configure HSRP with authentication for the vlan 100 and 200 ............................ 34 [email protected]

Task6 configure RSTP for the vlan 200 and 100. ................................................................ 34 Task7 configure ospf routing and redistribute ...................................................................... 34 Task8 configure DAI and DHCP snooping ................................................................................ 34 Task9 Test connectivity to internet from host 1 and host2 to internet. ........................ 35

LAB3: Configuration WAN connectivity and BGP Routes........................................................... 46

Objectives on this lab ................................................................................................................. 46 Task1: configure the interface of all routers (cf table above)........................................ 48 Task2: Configure OSPF between all routers .......................................................................... 48 Task3: Configure eBGP ............................................................................................................... 48 Task4: Configure iBGP ................................................................................................................ 49 Task5: Configure iBGP route-reflector (ccnp level).............................................................. 49 Task6: Configure VRRP between CE1 and CE2....................................................................... 49

LAB4: SITE 1 ............................................................................................................................ 58

Objectives on this lab and what you will learn:..................................................................... 58 Task1: configureallinterfaces(cftableabove).................................................................60 Task2: Configure the WAN CE-10 .......................................................................................... 60 Task3: Enable and configure CDP ............................................................................................. 60 Task4: Configure spanning tree................................................................................................. 60 Task5: Configure port security ................................................................................................. 60

LAB5: SITE 2 ............................................................................................................................ 66

Objectives on this lab and what you will learn : ................................................................... 66 Task1: configureallinterfaces(cftableabove).................................................................69 Task2: Configure the WAN CE1-20 ........................................................................................ 69 Task2: Configure the WAN CE2-20 ........................................................................................ 69 Task4: Configure ibgp back to back......................................................................................... 69 Task5: Configure Hsrp lan ......................................................................................................... 69 Task6: Configure Spanning tree mst ........................................................................................ 69 Task7: check and Configure resiliency..................................................................................... 70 Task8: Configure QOS and apply them outbound on interface G0/3 ................................ 70

LAB6: SITE 3 ............................................................................................................................ 82

Objectives on this lab ................................................................................................................. 82 Task1: configureallinterfaces(cftableabove).................................................................84

[email protected]

Task2: Configure the WAN CE1-30 ........................................................................................ 84 Task3: Configure the WAN CE2-30 ........................................................................................ 84 Task4: Enable and configure EIGRP......................................................................................... 84 Task4: Configuration floating static route ............................................................................. 84 Task5: check the first resiliency ............................................................................................. 85 Task6: Configure ibgp peering................................................................................................... 85 Task7: check the second resiliency.......................................................................................... 86 Task1: configureallinterfaces(cftableabove).................................................................87 Task2: Configure the WAN CE1-30 ........................................................................................ 87 Task3: Configure the WAN CE2-30 ........................................................................................ 87 Task4: Enable and configure EIGRP......................................................................................... 88 Task4: Configuration floating static route ............................................................................. 89 Task5: check the first resiliency ............................................................................................. 90 Task6: Configure ibgp peering................................................................................................... 90 Task7: check the second resiliency.......................................................................................... 92

LAB7 SITE 4 (CCNA /CCNP SEC) ................................................................................................. 94

Objectives on this lab ................................................................................................................. 94 Task1: configureallinterfaces(cftableabove).................................................................95 Task2: Configure IPSEC ............................................................................................................. 95 Task3: Verify the connectivity ................................................................................................. 97

LAB8 SITE 5 (CCNA SEC /CCNP SEC) - Soon .............................................................................. 112

Objectives on this lab............................................................................................................... 112

 

A+ guys

 

 

Hidden Content

• Give reaction or reply to this topic to see the hidden content.

 

[hide][/hide]

 

 

THANK U

[mechawolfxx]

Can anyone re-upload .unl file please?

[ghettheo]

Thanks

[ghettheo]

Thanks

 

[lion2021]

..

[pragad]

ok

 

[shawarma]

TY!!

[caspero]

ty

[Subarsa]

nice lab thanks

[ofahim]

Hi,

Would you be able to reshare the whole thing with the UNL file too?

Thanks

 

[braviaappstr]

thx

[VIJAYVASOYA]

thanks