enterprise Posted September 24, 2021 Author Share Posted September 24, 2021 (edited) Task 1.7 + 1.8 perfect task config ------------ 1.7 ------------- Chinesedumps-SW101/Chinesedumps-SW102 Chinesedumps-SWxxx>en Chinesedumps-SWxxx#conf t Chinesedumps-SWxxx(config)#router eigrp ccie Chinesedumps-SWxxx(config-router)#address-family ipv6 uni as 65001 Chinesedumps-SWxxx(config-router-af)#af-interface default Chinesedumps-SWxxx(config-router-af)#shut Chinesedumps-SWxxx(config-router-af)#passive Chinesedumps-SWxxx(config-router-af)#af-interface g0/0 Chinesedumps-SWxxx(config-router-af)#no shut Chinesedumps-SWxxx(config-router-af)#no passive Chinesedumps-SWxxx(config-router-af)#af-interface g0/1 Chinesedumps-SWxxx(config-router-af)#no shut Chinesedumps-SWxxx(config-router-af)#no passive Chinesedumps-SWxxx(config-router-af)#af-interface vlan 2000 Chinesedumps-SWxxx(config-router-af)#no shut Chinesedumps-SWxxx(config-router-af)#af-interface vlan 2001 Chinesedumps-SWxxx(config-router-af)#no shut Chinesedumps-R11/Chinesedumps-R12 Chinesedumps-Rxx>en Chinesedumps-Rxx#conf t Chinesedumps-Rxx(config)#router eigrp ccie Chinesedumps-Rxx(config-router-af)#address-family ipv6 uni as 65001 Chinesedumps-Rxx(config-router-af)#af-interface default Chinesedumps-Rxx(config-router-af)#shut Chinesedumps-Rxx(config-router-af)#passive Chinesedumps-Rxx(config-router-af)#af-interface g0/1 Chinesedumps-Rxx(config-router-af)#no shut Chinesedumps-Rxx(config-router-af)#no passive Chinesedumps-Rxx(config-router-af)#af-interface g0/2 Chinesedumps-Rxx(config-router-af)#no shut Chinesedumps-Rxx(config-router-af)#no passive Chinesedumps-Rxx(config-router-af)#af-interface g0/3 Chinesedumps-Rxx(config-router-af)#no shut Chinesedumps-Rxx(config-router-af)#no passive Chinesedumps-Rxx(config-router-af)#af-interface lo0 Chinesedumps-Rxx(config-router-af)#no shut ------------ 1.8 ------------- Chinesedumps-R21,Chinesedumps-R22,Chinesedumps-R23 Chinesedumps-Rxx>en Chinesedumps-Rxx#conf t Chinesedumps-Rxx(config)#router ospf 1 Chinesedumps-Rxx(config-router)#prefix-suppression Chinesedumps-R24 Chinesedumps-R24>en Chinesedumps-R24#conf t Chinesedumps-R24(config-router)#router ospf 1 Chinesedumps-R24(config-router)#prefix-suppression Chinesedumps-R24(config-router)#redistribute eigrp 65006 Chinesedumps-R24(config-router)#summary-address 10.6.0.0 255.254.0.0 Chinesedumps-SW211 Chinesedumps-SW211>en Chinesedumps-SW211#conf t Chinesedumps-SW211(config)#router ospf 1 Chinesedumps-SW211(config-router)#prefix-suppression Chinesedumps-SW211(config-router)#passive g1/1 Chinesedumps-SW211(config-router)#passive g1/2 Chinesedumps-SW211(config-router)#passive g1/3 Chinesedumps-SW212 Chinesedumps-SW212>en Chinesedumps-SW212#conf t Chinesedumps-SW212(config)#router ospf 1 Chinesedumps-SW212(config-router)#prefix-suppression Chinesedumps-SW212(config-router)#passive g1/1 Chinesedumps-SW212(config-router)#passive g1/2 Chinesedumps-SW201/Chinesedumps-SW202 Chinesedumps-SWxxx>en Chinesedumps-SWxxx#conf t Chinesedumps-SWxxx(config)#router ospf 1 Chinesedumps-SWxxx(config-router)#prefix-suppression Chinesedumps-SWxxx(config-router)#int vlan 3999 Chinesedumps-SWxxx(config-router)#ip mtu 1496 Chinesedumps-SWxxx(config-router)#exit Chinesedumps-SWxxx(config)#int vlan 4000 Chinesedumps-SWxxx(config-if)#ip ospf prefix-suppression disable Its lot bigger configs please send me personal message so i can keep replying to your queries. Edited September 24, 2021 by enterprise Link to comment Share on other sites More sharing options...
NiceGuy Posted September 24, 2021 Share Posted September 24, 2021 1 hour ago, enterprise said: Its lot bigger configs please send me personal message so i can keep replying to your queries. Text files, easily created using a simple text editor such as notepad (Windows) or nano (linux) can be a pretty handy and compact way to share large configuration file. Share complete configurations in files, make a brotha happy 🙂 While you are in the sharing mode, please do consider also sharing the lab dumps / scenarios. 2 1 Link to comment Share on other sites More sharing options...
hmizou Posted September 24, 2021 Share Posted September 24, 2021 thank you for your feedback Link to comment Share on other sites More sharing options...
cshaw Posted September 30, 2021 Share Posted September 30, 2021 thnx Link to comment Share on other sites More sharing options...
yousajang Posted October 1, 2021 Share Posted October 1, 2021 Thank you for sharing. Link to comment Share on other sites More sharing options...
Adeshwal Posted October 3, 2021 Share Posted October 3, 2021 Thanks Link to comment Share on other sites More sharing options...
nino Posted October 14, 2021 Share Posted October 14, 2021 thnx Link to comment Share on other sites More sharing options...
routemap Posted October 14, 2021 Share Posted October 14, 2021 thanks a lot Link to comment Share on other sites More sharing options...
ohmychamp Posted October 14, 2021 Share Posted October 14, 2021 thnks Link to comment Share on other sites More sharing options...
gman Posted October 27, 2021 Share Posted October 27, 2021 thanks Link to comment Share on other sites More sharing options...
orochi Posted October 29, 2021 Share Posted October 29, 2021 On 9/24/2021 at 7:35 PM, enterprise said: Task 1.7 + 1.8 perfect task config ------------ 1.7 ------------- Chinesedumps-SW101/Chinesedumps-SW102 Chinesedumps-SWxxx>en Chinesedumps-SWxxx#conf t Chinesedumps-SWxxx(config)#router eigrp ccie Chinesedumps-SWxxx(config-router)#address-family ipv6 uni as 65001 Chinesedumps-SWxxx(config-router-af)#af-interface default Chinesedumps-SWxxx(config-router-af)#shut Chinesedumps-SWxxx(config-router-af)#passive Chinesedumps-SWxxx(config-router-af)#af-interface g0/0 Chinesedumps-SWxxx(config-router-af)#no shut Chinesedumps-SWxxx(config-router-af)#no passive Chinesedumps-SWxxx(config-router-af)#af-interface g0/1 Chinesedumps-SWxxx(config-router-af)#no shut Chinesedumps-SWxxx(config-router-af)#no passive Chinesedumps-SWxxx(config-router-af)#af-interface vlan 2000 Chinesedumps-SWxxx(config-router-af)#no shut Chinesedumps-SWxxx(config-router-af)#af-interface vlan 2001 Chinesedumps-SWxxx(config-router-af)#no shut Chinesedumps-R11/Chinesedumps-R12 Chinesedumps-Rxx>en Chinesedumps-Rxx#conf t Chinesedumps-Rxx(config)#router eigrp ccie Chinesedumps-Rxx(config-router-af)#address-family ipv6 uni as 65001 Chinesedumps-Rxx(config-router-af)#af-interface default Chinesedumps-Rxx(config-router-af)#shut Chinesedumps-Rxx(config-router-af)#passive Chinesedumps-Rxx(config-router-af)#af-interface g0/1 Chinesedumps-Rxx(config-router-af)#no shut Chinesedumps-Rxx(config-router-af)#no passive Chinesedumps-Rxx(config-router-af)#af-interface g0/2 Chinesedumps-Rxx(config-router-af)#no shut Chinesedumps-Rxx(config-router-af)#no passive Chinesedumps-Rxx(config-router-af)#af-interface g0/3 Chinesedumps-Rxx(config-router-af)#no shut Chinesedumps-Rxx(config-router-af)#no passive Chinesedumps-Rxx(config-router-af)#af-interface lo0 Chinesedumps-Rxx(config-router-af)#no shut ------------ 1.8 ------------- Chinesedumps-R21,Chinesedumps-R22,Chinesedumps-R23 Chinesedumps-Rxx>en Chinesedumps-Rxx#conf t Chinesedumps-Rxx(config)#router ospf 1 Chinesedumps-Rxx(config-router)#prefix-suppression Chinesedumps-R24 Chinesedumps-R24>en Chinesedumps-R24#conf t Chinesedumps-R24(config-router)#router ospf 1 Chinesedumps-R24(config-router)#prefix-suppression Chinesedumps-R24(config-router)#redistribute eigrp 65006 Chinesedumps-R24(config-router)#summary-address 10.6.0.0 255.254.0.0 Chinesedumps-SW211 Chinesedumps-SW211>en Chinesedumps-SW211#conf t Chinesedumps-SW211(config)#router ospf 1 Chinesedumps-SW211(config-router)#prefix-suppression Chinesedumps-SW211(config-router)#passive g1/1 Chinesedumps-SW211(config-router)#passive g1/2 Chinesedumps-SW211(config-router)#passive g1/3 Chinesedumps-SW212 Chinesedumps-SW212>en Chinesedumps-SW212#conf t Chinesedumps-SW212(config)#router ospf 1 Chinesedumps-SW212(config-router)#prefix-suppression Chinesedumps-SW212(config-router)#passive g1/1 Chinesedumps-SW212(config-router)#passive g1/2 Chinesedumps-SW201/Chinesedumps-SW202 Chinesedumps-SWxxx>en Chinesedumps-SWxxx#conf t Chinesedumps-SWxxx(config)#router ospf 1 Chinesedumps-SWxxx(config-router)#prefix-suppression Chinesedumps-SWxxx(config-router)#int vlan 3999 Chinesedumps-SWxxx(config-router)#ip mtu 1496 Chinesedumps-SWxxx(config-router)#exit Chinesedumps-SWxxx(config)#int vlan 4000 Chinesedumps-SWxxx(config-if)#ip ospf prefix-suppression disable Its lot bigger configs please send me personal message so i can keep replying to your queries. For Q1.8, i don't think this is a complete solution as it's a 4 pts question and don't think it's just simple as apply the prefix-suppression only. Furthermore, the question asked about to advertise the summary routes for both 10.6.0.0 /15 and 10.200.0.0/24, however can see only 10.6.0.0 /15 is advertised. feel free to discuss. Link to comment Share on other sites More sharing options...
yoUSha Posted October 30, 2021 Share Posted October 30, 2021 Thanks Link to comment Share on other sites More sharing options...
Master Posted November 1, 2021 Share Posted November 1, 2021 On 10/29/2021 at 8:04 AM, orochi said: For Q1.8, i don't think this is a complete solution as it's a 4 pts question and don't think it's just simple as apply the prefix-suppression only. Furthermore, the question asked about to advertise the summary routes for both 10.6.0.0 /15 and 10.200.0.0/24, however can see only 10.6.0.0 /15 is advertised. feel free to discuss. Not necessary that section should be hard to get a lot of points Link to comment Share on other sites More sharing options...
Glepers Posted November 12, 2021 Share Posted November 12, 2021 thanks Link to comment Share on other sites More sharing options...
routemap Posted November 13, 2021 Share Posted November 13, 2021 On 10/29/2021 at 1:04 PM, orochi said: For Q1.8, i don't think this is a complete solution as it's a 4 pts question and don't think it's just simple as apply the prefix-suppression only. Furthermore, the question asked about to advertise the summary routes for both 10.6.0.0 /15 and 10.200.0.0/24, however can see only 10.6.0.0 /15 is advertised. feel free to discuss. I agree with @orochi. For R24, I think this is the configuration. And also I think it's a /16 (not /15), this have to be verified in the actual. Let's discuss. router ospf 1 prefix-suppression summary-address 10.6.0.0 255.255.0.0 summary-address 10.200.0.0 255.255.255.0 redistribute eigrp 65006 subnets Link to comment Share on other sites More sharing options...
umbrella Posted December 1, 2021 Share Posted December 1, 2021 thanks Link to comment Share on other sites More sharing options...
umbrella Posted December 6, 2021 Share Posted December 6, 2021 I have these concerns. Can someone explain why on 1.6 for R11 and R12 we need to un-shut the loopback? Chinesedumps-Rxx(config-router-af)#af-interface lo0 Chinesedumps-Rxx(config-router-af)#no shut For 1.9, how do we solve this requirement? Ensure that the routes learned over eBGP sessions and further advertised in BGP will be considered reachable even if the networks on inter-as links are not advertised in OSPF. The configuration of this requirement must be completed exclusively within the "router bgp" context. On requirement 1.12, does r24 need to shutdown the loopback in EIGRP? if yes, why? Link to comment Share on other sites More sharing options...
Avocado Posted February 1, 2022 Share Posted February 1, 2022 On 12/6/2021 at 9:46 PM, umbrella said: I have these concerns. Can someone explain why on 1.6 for R11 and R12 we need to un-shut the loopback? Chinesedumps-Rxx(config-router-af)#af-interface lo0 Chinesedumps-Rxx(config-router-af)#no shut For 1.9, how do we solve this requirement? Ensure that the routes learned over eBGP sessions and further advertised in BGP will be considered reachable even if the networks on inter-as links are not advertised in OSPF. The configuration of this requirement must be completed exclusively within the "router bgp" context. On requirement 1.12, does r24 need to shutdown the loopback in EIGRP? if yes, why? 1.12 r24 shutting down the loopback its because no need in EIGRP. Link to comment Share on other sites More sharing options...
martek Posted February 13, 2022 Share Posted February 13, 2022 Thanks! Link to comment Share on other sites More sharing options...
tecvictor Posted March 13, 2022 Share Posted March 13, 2022 Hello guys , what image IOL to use for labs and real lab study?????? Link to comment Share on other sites More sharing options...
technosol Posted March 15, 2022 Share Posted March 15, 2022 Hi, Has anybody passed the exam recently. What is the status of lab these days? 1 Link to comment Share on other sites More sharing options...
dahaboz Posted March 27, 2022 Share Posted March 27, 2022 Hi, Has anybody passed the exam recently. What is the status of lab these days? Link to comment Share on other sites More sharing options...
tecvictor Posted March 28, 2022 Share Posted March 28, 2022 Some news Guys? Link to comment Share on other sites More sharing options...
dai123 Posted April 18, 2022 Share Posted April 18, 2022 Guys anyone passed the exam recently? 1 Link to comment Share on other sites More sharing options...
MrPlinkett Posted April 19, 2022 Share Posted April 19, 2022 I can confirm that the majority of questions in section 1 are now new, including some tasks in section 2 for DNAC. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now