Analyst

Is there any workbook for this course? I could not see anything in the torrent but videos.

Hello guys I am looking for the presentations used in INE CCIE EI. Would somebody please upload them?

I am trying to simulate UCS servers but I found UCSPE very unstable from time to time. Also, it lacks a lot of features I really like to practice. Is there any way to simulate UCS on EVE or CIM?

Would you please share the valid link again? The current link is no longer valid.

Hello everyone! Could anybody please share the workbook for CCIE DC from chinesedumps.com? I would really appreciate that. Regards,

Hello everybody Is there any chance I can get access to CCIE DC lab exam dumps or questions that mimic the lab very accurately? I appreciate any help.

Hi everybody. Do you know any way to simulate Cisco UCS servers inside EVE-NG? Or, do I have to go for rack rental?

Many Thanks!

I checked the torrent (and by the way, thank you very much for the link) but I am not seeing version 6 (only 5.2). Will you please let me know if version 6 is in there?

Does anybody know of ay crack for Cisco CML?

Unfortunately only the first video could be downloaded and the rest of the links are dead! Could somebody please upload INE CCDE videos (if recent, much better!). I would really appreciate that.

for 5.0.1-12 is the latest version. no 5.1.5! for pnetlab it is 5.0.1

I run EVE-NG on a server. My NXOS devices have 4 CPUs and 16GB of RAM each. However, it takes at least 15 to 20 minutes for them to start and sometimes they crash and I will have to start them again. Any suggestion on how to run them faster, like 5 minutes?

And tell me how to start NXOS very fast

One thing that is bugging me is when I suspend vmware pnetlab VM without stopping the nodes, the next time that I start pnetlab, the nodes act weird or stop responding. This is annoying because I have to start NXOS nodes which take forever to start and sometimes I lose my previous configs. I have allocated 48GB of RAM and 12 CPU cores to pnetlab. Do you have a solution? Even fast starting NXOS would be nice

Hello Guys! Does anybody have the link to download ACI Simulator 6? Unfortunately I cannot download it from Cisco website since I do not have a contract ID. READ THE RULES BEFORE POSTING ORELSE GET BANNED DO NOT POST IN NO REQUEST FORUM

Hi everyone! I was wondering if I can find license or a hack to EVE-NG pro 4 or 5. I know you would say PNETLAB is a very good product with lots of visual features I would want but I found PNETLAB a little unstable in running some labs and prefer the integrity of EVE-NG.

Hello everyone Could anybody please share the latest CCIE DC exam dumps here, please?

Hello everyone, In case you can, I would be grateful to have Cisco APIC v5 iso which I cannot download due to not having contract id from cisco. Also downloading fro chinese networks are very hard and maybe unsafe.

Hello everyone Does anybody have a download link for Cisco ACI Simulator v5? I canot download it from Cisco website due to not having contract id.

Hello. What is the best image to practice for CCIE DC? Titamium image that I have, doesn't support more than one VDC and I am not sure what other features will be needed.

Hello everyone. I am trying to implement dot1x in eve-ng. I do the config on ISE and switch and when I try to configure windows supplicant I cannot figure out why things do not happen as they should! For example, I select User Authentication in dot1x settings in Windows but the popup doesn't appear to ask me about the credentials. The switch sends MAC address as username which is OK for the first step since I have enabled MAB but even when I disable MAB, switch only sends MAC address as username. Here is the switch configuration: SW1#sh run Building configuration... Current configuration : 3231 bytes ! ! Last configuration change at 11:53:46 EET Sat Jul 2 2022 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config ! hostname SW1 ! boot-start-marker boot-end-marker ! ! ! aaa new-model ! ! aaa group server radius DOT1X_AUTHENTICATION server name ISE-A server name ISE-B ! aaa authentication dot1x default group DOT1X_AUTHENTICATION aaa authorization network default group DOT1X_AUTHENTICATION aaa accounting update newinfo aaa accounting dot1x default start-stop group DOT1X_AUTHENTICATION ! ! ! ! ! aaa server radius dynamic-author client 10.10.100.101 server-key Cisco123 client 10.10.100.102 server-key Cisco123 ! aaa session-id common clock timezone EET 2 0 ! ! ! ! ! ! ip dhcp-relay source-interface Ethernet0/0 ! ! ip device tracking probe delay 15 ip cef ipv6 multicast rpf use-bgp no ipv6 cef authentication mac-move permit mab request format attribute 32 vlan access-vlan ! ! ! spanning-tree mode pvst spanning-tree extend system-id ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Ethernet0/0 switchport trunk encapsulation dot1q switchport mode trunk ! ! interface Ethernet0/1 description Connected to Win10 switchport mode access authentication event fail action next-method authentication event server dead action authorize vlan 1 authentication event server dead action authorize voice authentication event server alive action reinitialize authentication host-mode multi-domain authentication order mab dot1x authentication priority dot1x mab authentication port-control auto authentication periodic authentication timer reauthenticate server authentication violation restrict mab dot1x pae authenticator dot1x timeout tx-period 3 ! vlan 10 ! interface Vlan1 ip address 10.10.100.251 255.255.255.0 no shut ! interface Vlan10 ip address 10.10.10.254 255.255.255.0 no shut ! ip default-gateway 10.10.100.2 ip forward-protocol nd ! no ip http server ip http secure-server ! ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr ! ip access-list extended PRE_AUTHENTICATED_DEVICES permit udp any eq bootpc any eq bootpc permit udp any any eq domain permit icmp any any permit udp any any eq tftp deny ip any any ! ! ! ! radius-server attribute 6 on-for-login-auth radius-server attribute 6 support-multiple radius-server attribute 8 include-in-access-req radius-server attribute 25 access-request include radius-server attribute 31 mac format ietf upper-case radius-server attribute 31 send nas-port-detail radius-server dead-criteria tries 3 radius-server key Cisco123 ! radius server ISE-A address ipv4 10.10.100.101 auth-port 1812 acct-port 1813 key Cisco123 ! radius server ISE-B address ipv4 10.10.100.102 auth-port 1812 acct-port 1813 key Cisco123 ! ! control-plane ! ! line con 0 logging synchronous line aux 0 line vty 0 4 ! ! ! end What should I do? What is wrong with the config or simulation environment?

Well, I have that and unfortunately it lacks visual effects like curved links which I really like. I had to resort to PnetLab and it's engine kind of sucks sometimes!

Is this version 4? I have a feeling that this is version 2.

Have you received the link to download EVE-Pro? Could you share it please?