Ciscoboygr8

Hi, i can't share the file publicly unfortunate. The guys who spend days and nights on it would not be happy from me to share it here. I believe if you can give it a month or less, you will also be able to find the wrong answers. I hope you understand how hard it is to dedicate time for such work. Best of luck with your studies.

Passed 800+ Questions vce is valid, we have modified the dump and correct answers which are wrong. New question added to dump. Best of luck the rest.

The VLAN that must be trunked back to the Clean Access Server from the access switch is the "authentication VLAN". This VLAN is used to authenticate users and devices before they are granted access to the network. It is also where the Clean Access Server is typically connected to perform the necessary authentication and access control checks. This VLAN is typically separate from the user VLAN, untrusted VLAN, and management VLAN to ensure that only properly authenticated and authorized users and devices are allowed access to the network.

Reach me, maybe my version helps you

they are correct in dump.

Yes just see another question: How many fully established neighbour relationships exist on an Ethernet with five routers running OSPF as network type broadcast? A. 5 B. 6 C. 7 D. 10 E. 20 Dump answer is 7. But based on the below formula it has to be 10: n*n-1 /2 On an Ethernet with five routers running OSPF as network type broadcast, there would be 10 fully established neighbor relationships. This is because each router would establish a neighbor relationship with every other router in the network. In total, 5 routers * (5 routers - 1) = 10 fully established neighbor relationships.

many question has many right answers, but best answer should be selected.

The correct answer is D. De-encapsulating and re-encapsulating a packet in a data-link frame. This action is performed by the control plane in order to forward the packet to its intended destination by changing the data-link layer header and trailer. Explanation: A is a description of a data plane action, where the router or switch uses the routing table to determine the next hop for a packet and forwards it accordingly. B is not a correct answer because it is not a control plane action. The IPv6 Neighbor Discovery Protocol (NDP) is a protocol used for discovering other IPv6 nodes on the same link and determining their link-layer addresses, it is a part of the data plane. The control plane is responsible for managing the forwarding information and making forwarding decisions based on the routing table, but IPv6 Neighbor Discovery Protocol (NDP) is not involved in this process. C is a description of a data plane action, not a control plane action. The control plane is responsible for managing and maintaining the routing table and managing the network's topology. The control plane is responsible for making decisions about where to forward packets based on the routing table and other information it has about the network. The data plane, on the other hand, is responsible for forwarding packets based on the decisions made by the control plane. It uses the MAC address table to match the destination MAC address of an ethernet frame to the next hop device.

I would still be using D. In real world you don't use multicast in GRE tunnel.

B

B

As per Cisco LIVE document, you should select Trustworthiness of devices as next step. But normally it falls under step 3 after adaptive access policies. SO follow cisco document.

A GRE tunnel can only be used to transport unicast traffic, it can't handle multicast traffic unless many other features are enabled. In situations where multicast traffic is a critical part of the network, you will use MPLS VPN over DMVPN. A, B, C and E are not correct. Correct and accurate answer is D. The dump has lots of questions which i corrected and added explanation to it. If anyone interested they can DM me to discuss further.

A

There are many questions, i can't outline all here. If you have any doubt to any question, let me know i can help you with correct answer. The above question number is Q-40.

For instance see below question: What is a description of a control plane action? A. matching the destination IP address of an IP packet to the IP routing table B. hosts bating routers that reside attached links the IPv6 Neighbor Discovery Protocol C. Matching the destination MAC address of an ethernet frame to the MAC address table D. de-encapsulating and re-encapsulating a packet in a data-link frame Dumps answer is ( A ) but that is incorrect, correct answer is ( D ). A is a description of a data plane action, not a control plane action. The control plane is responsible for managing the routing and switching tables, as well as maintaining the integrity of the network topology. It is responsible for the decision-making process on where traffic should flow, and it communicates with other devices in the network to synchronize and share information about the network topology. On the other hand, the data plane is responsible for forwarding packets through the network based on the information provided by the control plane. It matches the destination IP address of an IP packet to the IP routing table and forwards the packet to its destination.

CD dumps and also PL both has lots of wrong answers. There are many questions which has to be fixed. That is why passing is very low and also whoever pass are getting very low marks. I have the list of those questions which should be corrected.

CD dumps and also PL both has lots of wrong answers. There are many questions which has to be fixed. That is why passing is very low and also whoever pass are getting very low marks. I have the list of those questions which should be corrected.

if you have any set, please share so we can download and everyone who wants it.

so what are accurate and authentic wb in market as of now?

which wb you used?