martek

For your convince and easy access, Here are PDF and VCE "400-007-unlocked_3-16.fixed " files (in zip)

Some of those "doubtful" answers are posted here on pages 5-10; There might be others "correct" or "not so much correct" answers. I have questioned some of them

I think this is what you look for , see this link valid for 14 days

Yes, just make sure it is 3.16 or 3.16.fixed, but not file named just 400-007 with title of pdf 400-007 -unlocked_2-28 pdf shared on 1st page (originally from Chinese dumps). File 3.16 is based on 2.28 but has few corrected answers. 3.16.fixed is based on 3.16 but has 2 more answers (D&D) and typos fixed. Do now worry about answers; if you memorize answers from 3.16 file, you will get 831 points (767 is passing score). So, you have few Qs that u can missed/messed up. We estimated you can miss 7 Qs and still pass using 3.16 vce or pdf! This also means that 3.16 file has about 17 Answers wrong. We still looking for corrections! I would schedule exam in the middle of week so that if there is a change on Monday, you still have time to cancel your exam. We assume that exam changes come on Mondays.

I agree! DO NOT USE PL , VapnAmi is fake user ! PL troll are AndreaPomari and QuentinAnti

thanks!

thanks!

thanks!

same thing shared in

Congrats!!! if u got more then 831 Score, did u change anything ?

HSRP / GLBP Lab Simulation - 2 alternatives/variants Configure HSRP between DISTRO-SW1 and DISTRO-SW2 on VLAN 100 for hosts connected to ACCESS-SW1 to achieve these goals: 1. Configure group number 1 using the virtual IP address of 192.168.1.1/24. 2. Configure DlSTRO-SW1 as the active router using a priority value of 110 and DISTRO-SW2 as the standby router. 3. Ensure that DISTRO-SW2 will take over the active role when DISTRO-SW1 goes down, and when DISTRO-SW1 recovers, it automatically resumes the active role. Answer: DISTRO-SW1 SW1 int vlan 100 standby 1 ip 192.168.1.1 standby 1 priority 110 standby 1 preempt copy run start DISTRO-SW2 SW2 int vlan 100 standby 1 ip 192.168.1.1 standby 1 preempt copy run start OR DISTRO-SW1 SW1 int vlan 100 glbp 1 ip 192.168.1.254 glbp 1 priority 110 glbp 1 timers 5 15 glbp 1 preempt copy run start DISTRO-SW2 SW2 int vlan 100 glbp 1 ip 192.168.1.254 glbp 1 timers 5 15 glbp 1 preempt copy run start Other labs 350-401 ENCOR Exam Simulation labs reviews part 1 BGP Lab is the link to

Here are Sim labs in 350-401 ENCOR exam so far; Note: Those May need correction(s) or changes. (will update if necessary) BGP Lab 1 BGP connectivity exists between Headquarters and both remote sites; however, Remote Site 1 cannot communicate with Remote Site 2. Configure BGP according to the topology to goals 1. Configure R1 and R3 under the BGP process to provide reachability between Remote Site 1 and Remote Site 2. No configuration changes are permitted on R2. 2. Ensure that the /32 networks at Remote Site 1 and Remote Site 2 can ping each other. R1 R1(config)#router bgp 123 R1(config-router)#address-family ipv4 R1(config-router-af)#neighbor 10.0.0.2 allowas-in R3 R3(config)#router bgp 123 R3(config-router)# address-family ipv4 R3(config-router-af)#neighbor 192.168.1.2 allowas-in R3#sh ip route bgp

Thanks!

Thanks!

when you copy, make sure you copy the whole thing, aka word "magnet" included !

Thanks!

Thanks!

main post is down; 404. That’s an error.

Thanks!

thanks!

thanks!

i guess this is request ?

Thanks!

any updates? how easy /difficult is lab ?

Thanks!