[offer]Labworkbook RE-UP !! MEGA LAB - CCNA refresh/CCNP - real enterprise situation

[BoshKash]

Thanks

[mechawolfxx]

Did anyone get the .eve/unl file? If you do, can you please re-upload?

[fbharde]

Thanks

[Pradip Chavda]

On 11/29/2022 at 8:45 PM, jedyou said:

hi guys,

Very nice lab here for refresh ccna skill gap to ccnp

real situation enterprise (configuration dhcp server, infoblox, routing; bgp,ospf static floating route, eigrp. sec : port sec dai inspection / lan vlan, stp(mst,rstp, stp)  and more

download fast please i kill the link next week 

 

LAB1: Configuration Datacenter connectivity and resiliency ....................................................... 7 Objectives on this lab ................................................................................................................... 7 TASK 1: Configure the hostnames and all interfaces (cf above table). ............................ 8 TASK 2: Configure the ip address of server Automation...................................................... 8 TASK 3: configure vlan 2,3, 400, and 500 on the switches: SW-DC1 & SW-DC2........ 8 TASK 4: configure interface vlan for vlan 2,3,400 and 500 (cf table). ........................... 8 TASK 5: configure the uplink trunk port between the switches .......................................... 8 TASK 6: configure the access port on the switches DC1 and DC2 : .................................. 8 TASK 7: configure Spanning tree DC1/DC2 : .......................................................................... 9 TASK8: Configure the REAL dhcp server ................................................................................. 9 TASK9: Configure OSPF between uplink DC to internet routers ....................................... 10 TASK10 : Configure INTERNET routers (DYNAMIQUE NAT Overload ) ....................... 12 TASK11 : Configure Redistribution default route ................................................................. 12 TASK12: Configure resiliency for vlan server........................................................................ 12 LAB2: Configuration MAN connectivity and resiliency .............................................................. 33 Objectives on this lab ................................................................................................................. 33 Task1: configure the vlans and the interface vlan on sw-CP1 and SW-CP3................... 34 Task2: configure ip address for host 1 and host2 ............................................................... 34

Task3: Configure SW-CP1’s G0/0, G0/1 interfaces to form a LACP EtherChannel with Sw-CP2 (po2) ................................................................................................................................ 34

Task4: Configure SW-CP2’s G0/2, G0/3 interfaces to form a LACP EtherChannel with Sw-CP2(po3).................................................................................................................................. 34

Task5: configure HSRP with authentication for the vlan 100 and 200 ............................ 34 [email protected]

Task6 configure RSTP for the vlan 200 and 100. ................................................................ 34 Task7 configure ospf routing and redistribute ...................................................................... 34 Task8 configure DAI and DHCP snooping ................................................................................ 34 Task9 Test connectivity to internet from host 1 and host2 to internet. ........................ 35

LAB3: Configuration WAN connectivity and BGP Routes........................................................... 46

Objectives on this lab ................................................................................................................. 46 Task1: configure the interface of all routers (cf table above)........................................ 48 Task2: Configure OSPF between all routers .......................................................................... 48 Task3: Configure eBGP ............................................................................................................... 48 Task4: Configure iBGP ................................................................................................................ 49 Task5: Configure iBGP route-reflector (ccnp level).............................................................. 49 Task6: Configure VRRP between CE1 and CE2....................................................................... 49

LAB4: SITE 1 ............................................................................................................................ 58

Objectives on this lab and what you will learn:..................................................................... 58 Task1: configureallinterfaces(cftableabove).................................................................60 Task2: Configure the WAN CE-10 .......................................................................................... 60 Task3: Enable and configure CDP ............................................................................................. 60 Task4: Configure spanning tree................................................................................................. 60 Task5: Configure port security ................................................................................................. 60

LAB5: SITE 2 ............................................................................................................................ 66

Objectives on this lab and what you will learn : ................................................................... 66 Task1: configureallinterfaces(cftableabove).................................................................69 Task2: Configure the WAN CE1-20 ........................................................................................ 69 Task2: Configure the WAN CE2-20 ........................................................................................ 69 Task4: Configure ibgp back to back......................................................................................... 69 Task5: Configure Hsrp lan ......................................................................................................... 69 Task6: Configure Spanning tree mst ........................................................................................ 69 Task7: check and Configure resiliency..................................................................................... 70 Task8: Configure QOS and apply them outbound on interface G0/3 ................................ 70

LAB6: SITE 3 ............................................................................................................................ 82

Objectives on this lab ................................................................................................................. 82 Task1: configureallinterfaces(cftableabove).................................................................84

[email protected]

Task2: Configure the WAN CE1-30 ........................................................................................ 84 Task3: Configure the WAN CE2-30 ........................................................................................ 84 Task4: Enable and configure EIGRP......................................................................................... 84 Task4: Configuration floating static route ............................................................................. 84 Task5: check the first resiliency ............................................................................................. 85 Task6: Configure ibgp peering................................................................................................... 85 Task7: check the second resiliency.......................................................................................... 86 Task1: configureallinterfaces(cftableabove).................................................................87 Task2: Configure the WAN CE1-30 ........................................................................................ 87 Task3: Configure the WAN CE2-30 ........................................................................................ 87 Task4: Enable and configure EIGRP......................................................................................... 88 Task4: Configuration floating static route ............................................................................. 89 Task5: check the first resiliency ............................................................................................. 90 Task6: Configure ibgp peering................................................................................................... 90 Task7: check the second resiliency.......................................................................................... 92

LAB7 SITE 4 (CCNA /CCNP SEC) ................................................................................................. 94

Objectives on this lab ................................................................................................................. 94 Task1: configureallinterfaces(cftableabove).................................................................95 Task2: Configure IPSEC ............................................................................................................. 95 Task3: Verify the connectivity ................................................................................................. 97

LAB8 SITE 5 (CCNA SEC /CCNP SEC) - Soon .............................................................................. 112

Objectives on this lab............................................................................................................... 112

 

A+ guys

 

Hidden Content

•   

 

[hide][/hide]

 

 

thanks

[Onepiece]

re-upload it plz

[darkiori]

thanks

[freebsd321]

Thanks

[LaDoseInfo]

thanks

 

[LusterMITPro]

Thanks

[aguest]

thanks

 

[aamirwahid]

Thanks

[aamirwahid]

Thanks

[Dodjer]

On 11/30/2022 at 10:45 AM, jedyou said:

hi guys,

Very nice lab here for refresh ccna skill gap to ccnp

real situation enterprise (configuration dhcp server, infoblox, routing; bgp,ospf static floating route, eigrp. sec : port sec dai inspection / lan vlan, stp(mst,rstp, stp)  and more

download fast please i kill the link next week 

 

LAB1: Configuration Datacenter connectivity and resiliency ....................................................... 7 Objectives on this lab ................................................................................................................... 7 TASK 1: Configure the hostnames and all interfaces (cf above table). ............................ 8 TASK 2: Configure the ip address of server Automation...................................................... 8 TASK 3: configure vlan 2,3, 400, and 500 on the switches: SW-DC1 & SW-DC2........ 8 TASK 4: configure interface vlan for vlan 2,3,400 and 500 (cf table). ........................... 8 TASK 5: configure the uplink trunk port between the switches .......................................... 8 TASK 6: configure the access port on the switches DC1 and DC2 : .................................. 8 TASK 7: configure Spanning tree DC1/DC2 : .......................................................................... 9 TASK8: Configure the REAL dhcp server ................................................................................. 9 TASK9: Configure OSPF between uplink DC to internet routers ....................................... 10 TASK10 : Configure INTERNET routers (DYNAMIQUE NAT Overload ) ....................... 12 TASK11 : Configure Redistribution default route ................................................................. 12 TASK12: Configure resiliency for vlan server........................................................................ 12 LAB2: Configuration MAN connectivity and resiliency .............................................................. 33 Objectives on this lab ................................................................................................................. 33 Task1: configure the vlans and the interface vlan on sw-CP1 and SW-CP3................... 34 Task2: configure ip address for host 1 and host2 ............................................................... 34

Task3: Configure SW-CP1’s G0/0, G0/1 interfaces to form a LACP EtherChannel with Sw-CP2 (po2) ................................................................................................................................ 34

Task4: Configure SW-CP2’s G0/2, G0/3 interfaces to form a LACP EtherChannel with Sw-CP2(po3).................................................................................................................................. 34

Task5: configure HSRP with authentication for the vlan 100 and 200 ............................ 34 [email protected]

Task6 configure RSTP for the vlan 200 and 100. ................................................................ 34 Task7 configure ospf routing and redistribute ...................................................................... 34 Task8 configure DAI and DHCP snooping ................................................................................ 34 Task9 Test connectivity to internet from host 1 and host2 to internet. ........................ 35

LAB3: Configuration WAN connectivity and BGP Routes........................................................... 46

Objectives on this lab ................................................................................................................. 46 Task1: configure the interface of all routers (cf table above)........................................ 48 Task2: Configure OSPF between all routers .......................................................................... 48 Task3: Configure eBGP ............................................................................................................... 48 Task4: Configure iBGP ................................................................................................................ 49 Task5: Configure iBGP route-reflector (ccnp level).............................................................. 49 Task6: Configure VRRP between CE1 and CE2....................................................................... 49

LAB4: SITE 1 ............................................................................................................................ 58

Objectives on this lab and what you will learn:..................................................................... 58 Task1: configureallinterfaces(cftableabove).................................................................60 Task2: Configure the WAN CE-10 .......................................................................................... 60 Task3: Enable and configure CDP ............................................................................................. 60 Task4: Configure spanning tree................................................................................................. 60 Task5: Configure port security ................................................................................................. 60

LAB5: SITE 2 ............................................................................................................................ 66

Objectives on this lab and what you will learn : ................................................................... 66 Task1: configureallinterfaces(cftableabove).................................................................69 Task2: Configure the WAN CE1-20 ........................................................................................ 69 Task2: Configure the WAN CE2-20 ........................................................................................ 69 Task4: Configure ibgp back to back......................................................................................... 69 Task5: Configure Hsrp lan ......................................................................................................... 69 Task6: Configure Spanning tree mst ........................................................................................ 69 Task7: check and Configure resiliency..................................................................................... 70 Task8: Configure QOS and apply them outbound on interface G0/3 ................................ 70

LAB6: SITE 3 ............................................................................................................................ 82

Objectives on this lab ................................................................................................................. 82 Task1: configureallinterfaces(cftableabove).................................................................84

[email protected]

Task2: Configure the WAN CE1-30 ........................................................................................ 84 Task3: Configure the WAN CE2-30 ........................................................................................ 84 Task4: Enable and configure EIGRP......................................................................................... 84 Task4: Configuration floating static route ............................................................................. 84 Task5: check the first resiliency ............................................................................................. 85 Task6: Configure ibgp peering................................................................................................... 85 Task7: check the second resiliency.......................................................................................... 86 Task1: configureallinterfaces(cftableabove).................................................................87 Task2: Configure the WAN CE1-30 ........................................................................................ 87 Task3: Configure the WAN CE2-30 ........................................................................................ 87 Task4: Enable and configure EIGRP......................................................................................... 88 Task4: Configuration floating static route ............................................................................. 89 Task5: check the first resiliency ............................................................................................. 90 Task6: Configure ibgp peering................................................................................................... 90 Task7: check the second resiliency.......................................................................................... 92

LAB7 SITE 4 (CCNA /CCNP SEC) ................................................................................................. 94

Objectives on this lab ................................................................................................................. 94 Task1: configureallinterfaces(cftableabove).................................................................95 Task2: Configure IPSEC ............................................................................................................. 95 Task3: Verify the connectivity ................................................................................................. 97

LAB8 SITE 5 (CCNA SEC /CCNP SEC) - Soon .............................................................................. 112

Objectives on this lab............................................................................................................... 112

 

A+ guys

 

Hidden Content

•   

 

[hide][/hide]

 

 

Hi, 
I am unable to download as there is no link, hence, please share again. 
Thanks more in advance. 

[darkiori]

thanks

[Bombino]

Thanks 

[mohamed09]

Thanks

[darkiori]

thanks

[darkiori]

thanks

[lion2021]

...

[freebsd321]

Thanks for sharing.

[freebsd321]

On 11/30/2022 at 1:45 PM, jedyou said:

hi guys,

Very nice lab here for refresh ccna skill gap to ccnp

real situation enterprise (configuration dhcp server, infoblox, routing; bgp,ospf static floating route, eigrp. sec : port sec dai inspection / lan vlan, stp(mst,rstp, stp)  and more

download fast please i kill the link next week 

 

LAB1: Configuration Datacenter connectivity and resiliency ....................................................... 7 Objectives on this lab ................................................................................................................... 7 TASK 1: Configure the hostnames and all interfaces (cf above table). ............................ 8 TASK 2: Configure the ip address of server Automation...................................................... 8 TASK 3: configure vlan 2,3, 400, and 500 on the switches: SW-DC1 & SW-DC2........ 8 TASK 4: configure interface vlan for vlan 2,3,400 and 500 (cf table). ........................... 8 TASK 5: configure the uplink trunk port between the switches .......................................... 8 TASK 6: configure the access port on the switches DC1 and DC2 : .................................. 8 TASK 7: configure Spanning tree DC1/DC2 : .......................................................................... 9 TASK8: Configure the REAL dhcp server ................................................................................. 9 TASK9: Configure OSPF between uplink DC to internet routers ....................................... 10 TASK10 : Configure INTERNET routers (DYNAMIQUE NAT Overload ) ....................... 12 TASK11 : Configure Redistribution default route ................................................................. 12 TASK12: Configure resiliency for vlan server........................................................................ 12 LAB2: Configuration MAN connectivity and resiliency .............................................................. 33 Objectives on this lab ................................................................................................................. 33 Task1: configure the vlans and the interface vlan on sw-CP1 and SW-CP3................... 34 Task2: configure ip address for host 1 and host2 ............................................................... 34

Task3: Configure SW-CP1’s G0/0, G0/1 interfaces to form a LACP EtherChannel with Sw-CP2 (po2) ................................................................................................................................ 34

Task4: Configure SW-CP2’s G0/2, G0/3 interfaces to form a LACP EtherChannel with Sw-CP2(po3).................................................................................................................................. 34

Task5: configure HSRP with authentication for the vlan 100 and 200 ............................ 34 [email protected]

Task6 configure RSTP for the vlan 200 and 100. ................................................................ 34 Task7 configure ospf routing and redistribute ...................................................................... 34 Task8 configure DAI and DHCP snooping ................................................................................ 34 Task9 Test connectivity to internet from host 1 and host2 to internet. ........................ 35

LAB3: Configuration WAN connectivity and BGP Routes........................................................... 46

Objectives on this lab ................................................................................................................. 46 Task1: configure the interface of all routers (cf table above)........................................ 48 Task2: Configure OSPF between all routers .......................................................................... 48 Task3: Configure eBGP ............................................................................................................... 48 Task4: Configure iBGP ................................................................................................................ 49 Task5: Configure iBGP route-reflector (ccnp level).............................................................. 49 Task6: Configure VRRP between CE1 and CE2....................................................................... 49

LAB4: SITE 1 ............................................................................................................................ 58

Objectives on this lab and what you will learn:..................................................................... 58 Task1: configureallinterfaces(cftableabove).................................................................60 Task2: Configure the WAN CE-10 .......................................................................................... 60 Task3: Enable and configure CDP ............................................................................................. 60 Task4: Configure spanning tree................................................................................................. 60 Task5: Configure port security ................................................................................................. 60

LAB5: SITE 2 ............................................................................................................................ 66

Objectives on this lab and what you will learn : ................................................................... 66 Task1: configureallinterfaces(cftableabove).................................................................69 Task2: Configure the WAN CE1-20 ........................................................................................ 69 Task2: Configure the WAN CE2-20 ........................................................................................ 69 Task4: Configure ibgp back to back......................................................................................... 69 Task5: Configure Hsrp lan ......................................................................................................... 69 Task6: Configure Spanning tree mst ........................................................................................ 69 Task7: check and Configure resiliency..................................................................................... 70 Task8: Configure QOS and apply them outbound on interface G0/3 ................................ 70

LAB6: SITE 3 ............................................................................................................................ 82

Objectives on this lab ................................................................................................................. 82 Task1: configureallinterfaces(cftableabove).................................................................84

[email protected]

Task2: Configure the WAN CE1-30 ........................................................................................ 84 Task3: Configure the WAN CE2-30 ........................................................................................ 84 Task4: Enable and configure EIGRP......................................................................................... 84 Task4: Configuration floating static route ............................................................................. 84 Task5: check the first resiliency ............................................................................................. 85 Task6: Configure ibgp peering................................................................................................... 85 Task7: check the second resiliency.......................................................................................... 86 Task1: configureallinterfaces(cftableabove).................................................................87 Task2: Configure the WAN CE1-30 ........................................................................................ 87 Task3: Configure the WAN CE2-30 ........................................................................................ 87 Task4: Enable and configure EIGRP......................................................................................... 88 Task4: Configuration floating static route ............................................................................. 89 Task5: check the first resiliency ............................................................................................. 90 Task6: Configure ibgp peering................................................................................................... 90 Task7: check the second resiliency.......................................................................................... 92

LAB7 SITE 4 (CCNA /CCNP SEC) ................................................................................................. 94

Objectives on this lab ................................................................................................................. 94 Task1: configureallinterfaces(cftableabove).................................................................95 Task2: Configure IPSEC ............................................................................................................. 95 Task3: Verify the connectivity ................................................................................................. 97

LAB8 SITE 5 (CCNA SEC /CCNP SEC) - Soon .............................................................................. 112

Objectives on this lab............................................................................................................... 112

 

A+ guys

 

 

Hidden Content

•   

 

[hide][/hide]

 

 

Thanks

[freebsd321]

On 12/2/2022 at 8:42 PM, jedyou said:

 

 

Thanks

[jedyou]

On 1/19/2023 at 7:59 PM, 7Core said:

no UNL file link available anymore - could someone be kindly enough to upload the UNL lab file again ?

its ok now

[jedyou]

On 3/9/2023 at 4:52 AM, mechawolfxx said:

can you share the eve-ng link please?

yes its ok now

[Estoks22]

On 6/18/2023 at 6:41 AM, paulaugust said:

Hi All, I hope you're having a great day! For those who are preparing for the CCNA Enterprise Infrastructure exam, I've found an excellent resource that could be of great help. It's a collection of comprehensive lab study materials, located on the Sensei Exams website, that has been meticulously designed to help you grasp the practical aspects of the exam.

These materials cover a wide range of topics in detail, ensuring you're equipped to tackle the exam confidently. You'll find structured labs that reflect real-world scenarios, which are crucial for understanding the EI concepts in depth.

Just wanted to share as I've found this resource quite valuable in my own preparation journey. You can check it out yourself at https://senseiexams.com/. Let me know if you found it useful or have any questions. Let's help each other excel in our respective IT journeys!

@paulaugust- you're just a scammer as well .stop promoting shit material .