preconfigured licensed ise, fw, fpr, fmc, ..

[thegreek1]

does anyone have the knowledge of licensed version of the software? it is getting harder and harder to crack them.

[NiceGuy]

15 minutes ago, thegreek1 said:

does anyone have the knowledge of licensed version of the software? it is getting harder and harder to crack them.

For evaluation / lab type use, or for real-life production use ?

 

[thegreek1]

1 hour ago, NiceGuy said:

For evaluation / lab type use, or for real-life production use ?

 

either or to be honest, evals only last 30 days for some. preferable lab use and testing permanent license

Edited October 22, 2021 by thegreek1

[NiceGuy]

4 hours ago, thegreek1 said:

either or to be honest, evals only last 30 days for some. preferable lab use and testing permanent license

Everytime I install ISE, it starts with a 90-day EVAL license. After 90-days I just reinstall. Works fine for my lab use.

 

 

[thegreek1]

below is the hack for ise, I was hoping to get one ise install and clone it so it can be shared.

 

[hide]

After installation you get a fully functional trial license for 90 days, it is enough, for example, to prepare for the exam.
Get unlimited in time license
Replacing flexlm
– Turn off the ISE
– Kopiryem flexlm-10.9.jar on USB drive
– Mount CentOS-7-x86_64-Minimal-1503-01.iso configured VM
– Boot in troubleshoot, rescue save cent0S
– Mount the USB drive in the VM settings
– We are at the command prompt centOS!
Consistently copy or rewrite the following commands in the console. Of course, it is necessary to understand what they are doing, and edit them as needed, such as usb you can not be mounted in sdb1.
cd / mnt / sysimage
mkdir usb
mount / dev / sdb1 usb
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/upgrade/javalib/flexlm-10.9.jar
chmod 755 ./opt/CSCOcpm/upgrade/javalib/flexlm-10.9.jar
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/caservice-webapp/WEB-INF/lib/flexlm-10.9.jar
chmod 644 ./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/caservice-webapp/WEB-INF/lib/flexlm-10.9.jar
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/ocsp-responder-webapp/WEB-INF/lib/flexlm-10.9.jar
chmod 644./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/ocsp-responder-webapp/WEB-INF/lib/flexlm-10.9.jar
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/appsrv/apache-tomcat-7.0.42/lib/flexlm-10.9.jar
chmod 755 ./opt/CSCOcpm/appsrv/apache-tomcat-7.0.42/lib/flexlm-10.9.jar
Unmount the USB DRIVE and CentOS Rescue CD.
Reboot your VM
-Start ISE 2.0 requires about 15 minutes, waiting, after chegomozhno connect to the web-based interface ISE
The next step – the license files.
You should replace the attached files licensing serial number on your own.
How to find your serial number:
1. Writing in the console: show udi
2. Copy the serial
3. Now you have to open the license file and replace “4L4CAAMFHJ6” to your serial.
4. Open the web interface and upload the license files
5. Done!

[/hide 

[spectrum]

.

 

Edited October 23, 2021 by spectrum

[spectrum]

36 minutes ago, thegreek1 said:

below is the hack for ise, I was hoping to get one ise install and clone it so it can be shared.

 

[hide]

After installation you get a fully functional trial license for 90 days, it is enough, for example, to prepare for the exam.
Get unlimited in time license
Replacing flexlm
– Turn off the ISE
– Kopiryem flexlm-10.9.jar on USB drive
– Mount CentOS-7-x86_64-Minimal-1503-01.iso configured VM
– Boot in troubleshoot, rescue save cent0S
– Mount the USB drive in the VM settings
– We are at the command prompt centOS!
Consistently copy or rewrite the following commands in the console. Of course, it is necessary to understand what they are doing, and edit them as needed, such as usb you can not be mounted in sdb1.
cd / mnt / sysimage
mkdir usb
mount / dev / sdb1 usb
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/upgrade/javalib/flexlm-10.9.jar
chmod 755 ./opt/CSCOcpm/upgrade/javalib/flexlm-10.9.jar
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/caservice-webapp/WEB-INF/lib/flexlm-10.9.jar
chmod 644 ./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/caservice-webapp/WEB-INF/lib/flexlm-10.9.jar
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/ocsp-responder-webapp/WEB-INF/lib/flexlm-10.9.jar
chmod 644./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/ocsp-responder-webapp/WEB-INF/lib/flexlm-10.9.jar
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/appsrv/apache-tomcat-7.0.42/lib/flexlm-10.9.jar
chmod 755 ./opt/CSCOcpm/appsrv/apache-tomcat-7.0.42/lib/flexlm-10.9.jar
Unmount the USB DRIVE and CentOS Rescue CD.
Reboot your VM
-Start ISE 2.0 requires about 15 minutes, waiting, after chegomozhno connect to the web-based interface ISE
The next step – the license files.
You should replace the attached files licensing serial number on your own.
How to find your serial number:
1. Writing in the console: show udi
2. Copy the serial
3. Now you have to open the license file and replace “4L4CAAMFHJ6” to your serial.
4. Open the web interface and upload the license files
5. Done!

[/hide 

 

 

ISE image comes with 90 days eval

[thegreek1]

Hey guys, I'm trying to get a perm license so I don't have to reinstall every 90 days.!

[erods]

On 10/24/2021 at 12:02 AM, thegreek1 said:

Hey guys, I'm trying to get a perm license so I don't have to reinstall every 90 days.!

Perform snapshot and rollback, or change time (IDK if it still works..)

[martek]

Thanks!

[kotonya]

thx

[StudentDude]

On 10/23/2021 at 5:10 AM, thegreek1 said:

below is the hack for ise, I was hoping to get one ise install and clone it so it can be shared.

 

[hide]

After installation you get a fully functional trial license for 90 days, it is enough, for example, to prepare for the exam.
Get unlimited in time license
Replacing flexlm
– Turn off the ISE
– Kopiryem flexlm-10.9.jar on USB drive
– Mount CentOS-7-x86_64-Minimal-1503-01.iso configured VM
– Boot in troubleshoot, rescue save cent0S
– Mount the USB drive in the VM settings
– We are at the command prompt centOS!
Consistently copy or rewrite the following commands in the console. Of course, it is necessary to understand what they are doing, and edit them as needed, such as usb you can not be mounted in sdb1.
cd / mnt / sysimage
mkdir usb
mount / dev / sdb1 usb
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/upgrade/javalib/flexlm-10.9.jar
chmod 755 ./opt/CSCOcpm/upgrade/javalib/flexlm-10.9.jar
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/caservice-webapp/WEB-INF/lib/flexlm-10.9.jar
chmod 644 ./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/caservice-webapp/WEB-INF/lib/flexlm-10.9.jar
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/ocsp-responder-webapp/WEB-INF/lib/flexlm-10.9.jar
chmod 644./opt/CSCOcpm/appsrv/apache-tomcat-ca-7.0.42/webapps/ocsp-responder-webapp/WEB-INF/lib/flexlm-10.9.jar
cp usb / flexlm-10.9.jar ./opt/CSCOcpm/appsrv/apache-tomcat-7.0.42/lib/flexlm-10.9.jar
chmod 755 ./opt/CSCOcpm/appsrv/apache-tomcat-7.0.42/lib/flexlm-10.9.jar
Unmount the USB DRIVE and CentOS Rescue CD.
Reboot your VM
-Start ISE 2.0 requires about 15 minutes, waiting, after chegomozhno connect to the web-based interface ISE
The next step – the license files.
You should replace the attached files licensing serial number on your own.
How to find your serial number:
1. Writing in the console: show udi
2. Copy the serial
3. Now you have to open the license file and replace “4L4CAAMFHJ6” to your serial.
4. Open the web interface and upload the license files
5. Done!

[/hide 

Does it work on ISE 3.1 ???

 

THANKS

[alireza123]

for licensing join us:

This is the hidden content, please

• Sign In
• or
• Sign Up

 

[AncientOne]

On 7/31/2023 at 9:24 PM, alireza123 said:

for licensing join us:

 

Hidden Content

• Give reaction or reply to this topic to see the hidden content.

 

 

$$$

[SDGJIUCVDER]

HELLO

[Rasel1976]

Any decent videos to share for ISE training?

[freebsd321]

Thanks

[jay555]

thanks

[Lopen]

thanks

[jcfp86]

Thanks

[Arnab]

Hi

[spwest]

tnx

[sugars]

🤗

[sugars]

🤗

[jpv128]

To save others the headahe I've gone through trying to find information about this crack, I'm going to post my own experiences. I installed ISE 2.0.0.306 via ISO and applied this crack with the provided license files. After licensing, I patched the unit from 2.0.0.306 to 2.7.0.356 with the latest patch (because the 2.0.0.306 version is completely useless, since it uses Flash for almost every function within the web interface). So far, I have ISE running and functional. However, the device consistently complains about the Plus and Apex licenses being invalid (despite the crack). Re-replacing the flexlm JAR file after upgrade causes the unit to fail to boot because of security checks. In addition, removing the Plus and Apex licenses leaves you with only basic licensing, which doesn't tell you much about the devices authenticating on your network (or in my case, completely useless). If you don't remove the Plus and Apex licenses, the unit will do so for you after 90 days. Alongside this, all ISE 2.x versions are susceptible to a bug where the policy editor doesn't work without rebooting the unit. This has only happened once, but is a major hassle to have to reboot your RADIUS/TACACS server (and take down your 802.1x wired and wireless networks temporarily while it comes back up, which takes at least 10 minutes because ISE is slow as hell to start) just to fix a policy or reconfigure authentication. It's also getting more difficult each day to locate ISE 2.x information online to learn more about this system, because ISE 2 is EOL.

For those asking if the flexlm crack works in ISE 3, NO it does not. ISE 3 has moved completely to smart licensing, and no longer uses PAKs and license files like ISE 2 did. There is NO crack/patch/medicine for ISE 3 at this time that I have been able to locate. If you know of any method to crack ISE 3, I would greatly appreciate if you'd share that information with me. The best I can think of would be to somehow crack or emulate a Cisco Smart Software Manager on-prem system, as those are installed in air-gapped networks that don't allow sensitive network hardware to pass outbound traffic. The SSM On-prem system is able to obtain licensing info from Cisco and relay this to the ISE appliance. If someone could crack one of these open and figure out whether it's just relaying a response from Cisco or if it's actually generating it's own internal license after confirming with CIsco that it's OK to do so, that may be an approach to cracking ISE 3. Otherwise, you'll be stuck having to reload your ISE appliance every 90 days as the trial expires. In addition, if you feel like wasting the time to set this up, Cisco has also provided some information called ISEEE (ISE Eternal Evaluation) for your lab. From what I can tell, it's a set of Python and Ansible playbooks that will automatically re-deploy your ISE appliance before the licensing runs out so you can keep it going forever. I have a lot of custom configuration within my appliance, and the Cisco video on how this works doesn't really explain much of how this can be set up or how it works, so definitely do your own research before trusting them on this "eternal evaluation". I'm off to go deploy ISE 3.2 (and patches) in my lab because I'd like my device visibility back, hope this helps some of you that are wanting an ISE crack.