[OFFER] 350-401 ENCOR

[Aliveli]

thanks 

[rayaj]

this good ?

[LeeDa1]

Thanks

[grulag]

ty

[noksmail]

thx i have the test lab and uploaded it

Spoiler

 

on youtube

[zjhonson]

10 hours ago, noksmail said:

thx i have the test lab and uploaded it

  Reveal hidden contents

 

on youtube

:O this is very helpful!!!

[noksmail]

Yesterday i exam but fail i found 4 sim 1. port channel and trunk 2. bgp with no use address 3. ospf with auto summary 4. ipsec

[lion2021]

...

[Hnet84]

thank's

[emorca]

On 7/1/2024 at 6:24 PM, zjhonson said:

Remember to practice VRF, they will not give you a complicated exercise, you just have to put the routes and declare the VRF Forwarding in the tunnel interface, that will be all.

For another scenario you may be asked to "protect the tunnel" you just have to enter the command "Tunnel Protect and put de profiel" that's all, everything is already preconfigured

For BGP you just have to declare the networks and neighboords and make BGP work

OSPF there are several scenarios, it may be that a router is only DR (changes priority to 255 on the interface) or it may be that they do not participate in DR or BRD (interface in p2p mode), it could also be preventing the propagation of a loopback, only you must apply the prefix list in the ASBR

You may be asked to configure a Portchannel, just make sure the port channel is configured and that's it, make it active.

Just try not to delay....

 

GOOD LUCK!

Done and passed! To me, this exam does not make sense at all, is just the key to access the final one, which is the lab.

The blueprint is covered end to end in the exam, most  questions (around 90%) come from the files you provided. The simluations I got where VRF, BGP, OSPF and  SPT+TRUNK+LACP....also aligned with the info provided. If the sims, are based on traditional R&S stuff, I wonder why a lot of qs, are Wireles, SDN, and Program...

Thanks for the tips and support, dude, really appreciated!!

Regards!

 

 

[zjhonson]

On 7/21/2024 at 5:08 PM, emorca said:

Done and passed! To me, this exam does not make sense at all, is just the key to access the final one, which is the lab.

The blueprint is covered end to end in the exam, most  questions (around 90%) come from the files you provided. The simluations I got where VRF, BGP, OSPF and  SPT+TRUNK+LACP....also aligned with the info provided. If the sims, are based on traditional R&S stuff, I wonder why a lot of qs, are Wireles, SDN, and Program...

Thanks for the tips and support, dude, really appreciated!!

Regards!

 

 

No problem, glad to know you passed!!! 🙂 

[emorca]

19 hours ago, zjhonson said:

No problem, glad to know you passed!!! 🙂 

Thanks, .....So whats next for you, will you be attemting the IE LAB?

 

Edited July 27, 2024 by emorca

[zjhonson]

10 hours ago, emorca said:

Thanks, .....So whats next for you, will you be attemting the IE LAB?

 

Nope, I need SD WAN or ENARSI certification, I have been studying for one year maybe o more, i hope to do it before the end of the year...
I think the CCIE LAB is much more complex than this

[emorca]

14 hours ago, zjhonson said:

Nope, I need SD WAN or ENARSI certification, I have been studying for one year maybe o more, i hope to do it before the end of the year...
I think the CCIE LAB is much more complex than this

Ok dude, I will be going for the LAB though,

Just ping me if you need anything.

Good luck!

 

[takak]

thx

[rayaj143]

greast

[freebsd321]

Thanks

[BankSH]

thanks

[sedoka33]

Thx

[jklmxe]

thanks

[Slicer]

thank you

[VBHunter]

TY

 

[Cheetos]

Thank you.

[sephir0th]

thx

[McKen]

Thanks!