ipmanyak

For Nexus 3000 intermediate versions were needed: 6.0(2)U3(9) 6.0(2)U5(2) 6.0(2)U6(2a) 6.0(2)U6(10) (!!!) 7.0(3)I7(1) 7.0(3)I7(9) (!!!) 9.3(7) (!!!) - These versions were very important, to my mind bcos they updated the BIOS, otherwise you get a brick One man upgraded Cisco Nexus 3048 successfully ( firmware was 6.0(2)U5(2) ) by this pathes: n3000-uk9.6.0.2.U6.2a.bin with kickstart n3000-uk9.6.0.2.U6.10.bin with kickstart n3000-compact.9.3.9.bin n3000-compact.9.3.13.bin For u nexus 3548 with 6.0.2.A8.11b other versions r not in cisco site, then u can begin with 7.0(3)I3(3), bcos version 7.0(3)I3(1) r not in cisco site too. P.S. Read manual about how to boot when upgrade fail. For Nexus 3048 was such procedure: How to boot when an update fails? Hold CTRL+L when a message appears and enter the bootloader Code: loader> boot bootflash:nxos.XXX_compact.bin After rebooting install all nxos bootflash: nxos.XXX [Hidden Content] Nexus 3000, 3100, and 3500 NX-OS Compact Image Procedure This document describes the steps used to reduce the file size of an NX-OS binary image file on Cisco Nexus 3000, 3100, and 3500 Series switches.

Do u know that upgrade from old version very special ? Intermediate versions may be needed. nxos.7.0.3.I1.3.bin [Hidden Content]

cat9k_iosxe.17.15.02.SPA.bin [Hidden Content]

asa9-14-4-24-smp-k8.bin [Hidden Content]

magnet link for FTD collection was above

pp-adv-cat3k-166.4-31-44.0.0.pack [Hidden Content]

See magnet link in my post above

magnet:?xt=urn:btih:b47396781dc76b9801c8280ab3a83cc519890a95&xt=urn:btmh:12208536134b00249170be048179766c2a92653600a0bdfb81f1029a01111d3263cc&dn=Secure%20Firewall%20FTD magnet:?xt=urn:btih:a827614a85d59c33614b003617197139c145f1fa&xt=urn:btmh:122096aec226ab5221a17243dcabe6dd71652ab1dd9f716e97af553184e6126be0b1&dn=Secure%20Firewall%20Management

asdm-7231.bin [Hidden Content] asdm-openjre-7231.bin [Hidden Content]

Take AIR-AP3800-K9-ME-8-5-182-0.tar [Hidden Content] Size and checksums are identical with 2800 2800 [Hidden Content] 3800 [Hidden Content]

Now we have only 2.8.0

csr1000v-universalk9.17.03.08a.iso [Hidden Content] csr1000v-universalk9.17.03.08a.ova [Hidden Content]

C890s_RM2.srec.SPA.154-1r.T2 [Hidden Content] c800-universalk9-mz.SPA.159-3.M10.bin [Hidden Content] c800-universalk9-mz.SPA.158-3.M9.bin [Hidden Content]

read the mail

asav9-22-1-1.zip [Hidden Content]

ap802-k9w7-tar.153-3.JF15.tar [Hidden Content]

I have only asr1000-universalk9_noli.16.12.08.SPA.bin need it ?

read the mail

C9800-AP-universalk9.17.12.04.zip [Hidden Content]

c7600rsp72043-adventerprisek9-mz.155-3.S10.bin [Hidden Content]

read the mail

isr4400-universalk9.17.12.04b.SPA.bin [Hidden Content]

c8000be-universalk9.17.09.05a.SPA.bin [Hidden Content] c8000be-universalk9.17.09.05e.SPA.bin [Hidden Content]

Cisco_Network_Sensor_Patch-6.6.7.2-11.sh.REL.tar [Hidden Content] Cisco_Network_Sensor_Upgrade-6.6.7-223.sh.REL.tar [Hidden Content] Cisco_FTD_Patch-6.6.7.2-11.sh.REL.tar [Hidden Content]

Read the rules of the forum, section "Suggestions for a friendly, easy to navigate forum.", paragraph 12. [Hidden Content]