Popular Post juan Posted October 22, 2021 Popular Post Share Posted October 22, 2021 (edited) Hi folks, Here you go the Juniper MPLS L2VPN coursebooks for learning and labbing. This has been possible thank you to @barabolja, and his patience downloading PDFs sheet by sheet. Spoiler This is the hidden content, please Sign In or Sign Up Cheers, juan Edited November 25, 2021 by juan link updated 269 70 5 3 Link to comment Share on other sites More sharing options...
hoctronque Posted October 22, 2021 Share Posted October 22, 2021 thanks Link to comment Share on other sites More sharing options...
juan Posted October 22, 2021 Author Share Posted October 22, 2021 This course cover all L2VPN options in JNCIE-SP lab. I strongly suggest you to study it. 1 Link to comment Share on other sites More sharing options...
kaspa Posted October 22, 2021 Share Posted October 22, 2021 Man, You rock like hell. Thanks so much Link to comment Share on other sites More sharing options...
yondaime Posted October 23, 2021 Share Posted October 23, 2021 thanks @juan Link to comment Share on other sites More sharing options...
xttbb Posted October 23, 2021 Share Posted October 23, 2021 thx Link to comment Share on other sites More sharing options...
Moo Posted October 23, 2021 Share Posted October 23, 2021 great share Link to comment Share on other sites More sharing options...
alexcama Posted October 23, 2021 Share Posted October 23, 2021 whowww , thxxxx Link to comment Share on other sites More sharing options...
cnet123 Posted October 23, 2021 Share Posted October 23, 2021 🖊️ Link to comment Share on other sites More sharing options...
nampt90 Posted October 24, 2021 Share Posted October 24, 2021 thx, Juan ! Link to comment Share on other sites More sharing options...
greatgeek1 Posted October 24, 2021 Share Posted October 24, 2021 Thank you very much. Link to comment Share on other sites More sharing options...
kechik Posted October 24, 2021 Share Posted October 24, 2021 Hi @juan, Thanks...Hopefully the other next material is L3VPN. Thanks Link to comment Share on other sites More sharing options...
cyberbird Posted October 25, 2021 Share Posted October 25, 2021 thanks a lot Link to comment Share on other sites More sharing options...
Hunter5832 Posted October 25, 2021 Share Posted October 25, 2021 Thank you Link to comment Share on other sites More sharing options...
study4ccna Posted October 25, 2021 Share Posted October 25, 2021 On 10/22/2021 at 7:26 AM, juan said: This course cover all L2VPN options in JNCIE-SP lab. I strongly suggest you to study it. Any chance of getting latest JMF & L3VPN course guides as well? Many thanks for all the other great shares 👍 1 Link to comment Share on other sites More sharing options...
juan Posted October 25, 2021 Author Share Posted October 25, 2021 4 minutes ago, study4ccna said: Any chance of getting latest JMF & L3VPN course guides as well? Many thanks for all the other great shares 👍 L3VPN will be available, I hope if everything goes right. 1 Link to comment Share on other sites More sharing options...
habib Posted November 16, 2021 Share Posted November 16, 2021 thanks Link to comment Share on other sites More sharing options...
CarlosHH7 Posted November 21, 2021 Share Posted November 21, 2021 thx dude Link to comment Share on other sites More sharing options...
cscp Posted November 23, 2021 Share Posted November 23, 2021 Hi Juan, There is an error at the website. Can help to reload the book? Thanks Link to comment Share on other sites More sharing options...
Frans Posted November 23, 2021 Share Posted November 23, 2021 thanks! Link to comment Share on other sites More sharing options...
Ssay Posted November 24, 2021 Share Posted November 24, 2021 NEW QUESTION 123 An engineer must advertise a selection of external networks learned from a BGP neighbor into the ACI fabric. Which L3Out subnet configuration option creates an inbound route map for route filtering? A. External Subnets for the External EPG B. Shared Route Control Subnet C. Import Route Control Subnet D. Shared Security Import Subnet Answer: C NEW QUESTION 124 An engineer must set up a Cisco ACI fabric to send Syslog messages related to hardware events, such as chassis line card failures. The messages should be sent to a dedicated Syslog server. Where in the Cisco APIC should the policy be configured to meet this requirement? A. uni/tn-common/monepg-default B. uni/infra/monifra-default C. uni/fabric/monfab-default D. uni/fabric/moncommon Answer: C NEW QUESTION 125 An engineer must implement management policy and data plane separation in the Cisco ACI fabric. Which ACI object must be created in Cisco APIC to accomplish this goal? A. Application profile. B. Tenant. C. Contract. D. Bridge domain. Answer: B NEW QUESTION 126 An engineer is implementing a Cisco ACI environment that consists of more than 20 servers. Two of the servers support only Cisco Discovery Protocol with no order link discovery protocol. The engineer wants the servers to be discovered automatically by the Cisco ACI fabric when connected. Which action must be taken to meet this requirement? A. Create an override policy that enables Cisco Discovery Protocol after LLDP is enabled in the default policy group. B. Configure a higher order interface policy that enables Cisco Discovery Protocol for the interface on the desired leaf switch. C. Configure a lower order policy group that enables Cisco Discovery Protocol for the interface on the desired leaf switch. D. Create an interface profile for the interface that disables LLDP on the desired switch that is referenced by the interface policy group. Answer: A NEW QUESTION 127 An engineer wants to monitor all configuration changes, threshold crossing, and link-state transitions in a Cisco ACI fabric. Which action must be taken to receive the required messages? A. Add Faults and Events to the monitor policy. B. Add Session Logs and Audit Logs to the monitor policy. C. Include Audit Logs and Events in the Syslog source policy. D. Include Events and Session Logs in the Syslog source policy. Answer: C NEW QUESTION 128 An organization has encountered many STP-related issues in the past due to failed hardware components. They are in the process of long-term migration to a newly deployed ACI fabric. Senior engineers are worried that spanning-tree loops in the existing network may be extended to the ACI fabric. Which feature must be enabled on the ACI leaf ports to protect the fabric from spanning-tree loops? A. BPDU Guard B. per-VLAN MCP C. Storm Control D. BPDU Filter Answer: B NEW QUESTION 129 A network engineer must design a method to allow the Cisco ACI to redirect traffic to the firewalls. Only traffic that matches specific L4-L7 policy rules should be redirected. The load must be distributed across multiple firewalls to scale the performance horizontally. Which action must be taken to meet these requirements? A. Configure ACI Service Graph with Unidirectional PBR. B. Implement ACI Service Graph with GIPo. C. Implement ACI Service Graph Two Nodes with GIPo. D. Configure ACI Service Graph with Symmetric PBR. Answer: D NEW QUESTION 130 An engineer created two interface protocol policies called Pol_CDP40275332 and Pol_LLDP46783451. The policies must be used together in a single policy. Which ACI object must be used? A. interface policy group B. switch policy group C. switch profile D. interface profile Answer: A NEW QUESTION 131 What is the minimum number of APICs does Cisco recommend to deploy in a production cluster? A. 1 B. 3 C. 4 D. 5 Answer: B NEW QUESTION 132 An engineer must allow multiple external networks to communicate with internal ACI subnets. Which action should the engineer take to assign the prefix to the class ID of the external Endpoint Group? A. Enable the Export Route Control Subnet for the External Endpoint Group flag. B. Enable an L3Out with Shared Route Control Subnet. C. Configure subnets with the External Subnets for External EPG flag enabled. D. Configure subnets with the Import Route Control Subnet flag enabled. Answer: C NEW QUESTION 133 An engineer must ensure that Cisco ACI flushes the appropriate endpoints when a topology change notification message is received in an MST domain. Which three steps are required to accomplish this goal? (Choose three.) A. Enable the BPDU interface controls under the spanning tree interface policy. B. Configure a new STP interface policy. C. Bind the spanning tree policy to the switch policy group. D. Associate the STP interface policy to the appropriate interface policy group. E. Create a new region policy under the spanning tree policy. F. Map VLAN range to MAT instance number. Answer: ABD NEW QUESTION 134 A Cisco ACI bridge domain and VRF are configured with a default data-plane learning configuration. Which two endpoint attributes are programmed in the leaf switch when receiving traffic? (Choose two.) A. Remote MAC, IP. B. Remote Subnet. C. Local IP, not MAC. D. Local MAC, IP. E. Local Subnet. F. Remote IP. Answer: DF NEW QUESTION 135 An engineer must configure a group of servers with a contract that uses TCP port 80. The EGP that contains the web servers requires an external Layer 3 cloud to initiate communication. Which action must be taken to meet these requirements? A. Configure the EGP as a provider and L3 out as consumer of the contract. B. Configure OSPF to exchange routes between the L3 out and EGP. C. Configure a taboo contract and apply it to the EPG. D. Configure the EPG as a consumer and L3 out as a provider of the contract. Answer: A NEW QUESTION 136 …… Link to comment Share on other sites More sharing options...
Ssay Posted November 24, 2021 Share Posted November 24, 2021 All those new questions are from PassLeadr 300-620 dumps., can any one have this dumps to share please ? Link to comment Share on other sites More sharing options...
Nebula50 Posted November 25, 2021 Share Posted November 25, 2021 Hi all, the link to the study guide doesn't work. Link to comment Share on other sites More sharing options...
cscp Posted November 25, 2021 Share Posted November 25, 2021 Thanks, Juan. Link to comment Share on other sites More sharing options...
Aradu Posted November 27, 2021 Share Posted November 27, 2021 Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now