[OFFER] CPLL – Configuring Cisco MDS 9000 Series Switches (DCMDS) v3.1

[thomisus]

This is the hidden content, please

• Sign In
• or
• Sign Up

 

The Configuring Cisco MDS 9000 Series Switches (DCMDS) v3.1 course shows you how to implement, manage, and troubleshoot Cisco® MDS 9000 Series Switches, to build highly available, scalable storage networks.

Through a combination of instructor video, text, and extensive hands-on practice, you will learn how to deploy and use capabilities such as virtual storage area networks (VSANs), role-based access control (RBAC), N-Port Virtualization (NPV) fabric security, zoning, automation with NX-API, Slow Drain Analysis, SAN analytics, Fibre Channel over TCP/IP (FCIP) tunnels, and more. You will learn how to configure and implement platform features and learn troubleshooting techniques pertaining to Fibre Channel domains, firmware upgrades, zones, and zone merges.

This course helps prepare you to take the exam Implementing Cisco Storage Area Networking (300-625 DCSAN), which leads to CCNP Data Center and the Certified Specialist – Data Center SAN Implementation certifications.

Course Objectives

After taking this course, you should be able to:

Discover and describe the Cisco Multilayer Director Switch (MDS) platform of multilayer switches and directors. Describe the MDS hardware, Cisco NX-OS operating system, Data Center Network Manager (DCNM) management software, and key architectures of the platform, such as Fibre Channel and Fibre Channel over Ethernet (FCoE)
Describe key product features of the MDS platform, including VSANs, RBAC, NPV, port channels, zoning, device aliases, inter-VSAN routing (IVR), and fabric security
Describe and implement state-of-the-art product features, including NX-API, slow-drain analysis, SAN Analytics and 32-GB Fibre Channel interfaces
Configure and implement the Cisco MDS switches and platform features, such as initial configuration, building a fabric, building a SAN extension, and configuring inter-VSAN routing for that purpose
Configure FCIP tunnels
Resolve issues and troubleshoot Fibre Channel domains, zones and zone merges, and switch boot and firmware upgrades

Target Audience

Data center systems engineers
Data center field engineers
Data center architects
Technical decision makers
Network architects
Cisco integrators and partners

Course Prerequisites

To fully benefit from this course, you should have the following knowledge and skills:

Basic understanding of data storage hardware components and protocols, including Small Computer System Interface (SCSI) and Fibre Channel
Basic understanding of network protocols, including Ethernet and IP
Basic routing and switching knowledge

[Pradip Chavda]

Thanks for sharing

[pcmaster17]

thank you

[Glepers]

thx

[CarlosHH7]

thx dude

 

[CCIE17]

thank you

[abcindian]

🙂

[skulligno]

links down

Edited February 4, 2022 by skulligno

[RichardPas]

ththx

[Sudha]

thanks

[ghettheo]

Thanks

[mohamed09]

Thanks 

[sothea]

Dear Team, 

I hope you all doing well nowadays, thanks.

Pls help to share me below values courses. 

-  Implementing Cisco Nexus 9000 Switches in NX-OS Mode – Advanced (DCNXA) v1.0

- Introducing Cisco Nexus 9000 Switches in NX-OS Mode (DCINX9K) v2.1

 

Thanks and Best Regards,

Thea

[RichDMFather]

mantap

[lazytech]

T

[Surazb000]

Thanks

[Suhamjad]

Links dead.

Edited December 1, 2022 by Suhamjad

[Mohamed11]

links expired ,could you share new links for this course again ??

[Mohamed11]

anyone can share this course again ???

[kotonya]

k

[lion2021]

..

[DarkSpirit]

T

[vmdulls]

thanks

[ShyamLove589]

Hi

[mbexo]

t