Search the Community

[Hidden Content] NO PASSWORD Required

Result Failed ==== I used vendor sp*t*, they also don't have the solution for the new lab exam. so no point to buy from them ==== Feedback Design: 40% old Design ALL new questions about Hyperconverged vs Converged Systems, about UCS Director multi node deployment, about ACI considerations, ======================================================== Feedback about Deploy, Operate and Optimize all new questions, only about 10% like old DOO Topology is “almost” the same, but the connectivity in ACI with Nexus is different (L2out, new L3out with SVI, VPC, and L2 ports only (******** access to vCenter and DCNM is obtained by configuring stuff correctly, otherwise you do not get access to both consoles) Section 1: - VPC but with new considerations (delay restore, Active Switch, etc) - Troubleshoot OSPF (the process is called DATACENTER, and in some ports it shows as DATACENTER1, DC1, MTU misconfiguration in some ports, network types) etc; - tricky multicast question about not using shared trees with IP 100.0.0.1, in DC1 and DC2 —— two loopback in the environment (N9k-DC1 and N9k-DC2) use this same IP already (Lo100) - nothing configured for VXLAN EVPN multisite (for a session that is slow this is a killler as there is a lot to configure for BGP, VXLAN, etc). maybe use DCNM to deploy quickly the fabric for DC1 and DC2? this involves 3 questions: all BGP configs, configure vxlan and nve1, multicast - question about configuring syslog with level 5 only - configure NTP on N5ks in DC1, N5k-1 configured as NTP Server, and N5k-2 configured as NTP client - using DCNM, configure only a policy for DC1 and DC2 - N9k-DC2 change a python script located at /bootflash/changepython.py (do not forget to save the script) - Access to N7k is through VDC admin — there are 4 VDCs in DC1 named as 1, 2, 3, and 4 (you have to find which one is connected to N5ks and N9ks); there are 3 VDCs in DC2 named as 1, 2, 3 (you have to find which one is connected to N9k-DC2, and which to ACI, L2Out, L3out with SVI, VPC, etc) Section2: - Discover the UCS has an issue, server ports for IOM-A shows as either disconnected or down, spent a lot of time trying to figure out if it was a config issue (proctor said the questions indicate but did not found the issue) — hence this affected the whole solutions as IOM-A was never discovered - Monitor vhbas on service profiles using int 1/32 on the Fabric Interconnects - full L2 disjoint solution, as vlan 101-104 have to use the port-channels going to Nexus 5k1 and N5k-2, and VLANs 10, 20, 30 and 40 have to be transmitted to N5k-3 and Nk-4 (unified port instead of FCoE port) - Troubleshoot SP1 assigned to Server 2, (as there was a path missing because of IOM-A not discovered other issues showed up, such as path not available, etc). the issue to troubleshoot is RAID configuration). all policies and SP template for this SP are in place - create new policies to troubleshoot SP2 ( you have to clone SP1 to SP2, then SP2 is assigned to Server 1, this is the one to boot from SAN, most of configs are in place, but you have to create new ones, WWPN 10 and 11 still apply) - create zoning from scratch so that SP2 boots from SAN (remember, as there was an issue discovering IOM-A even though you config correctly you will be missing a path to boot disk if you did not solve the Server Port issues) …. new vsan numbers vsan 50 and vsan 60; ports are shut in both N5k3 and N5k4, and FI-A and FI-B - create new policies (like network control and others) - Section3: (all new here, all from scratch, so probably a strategy to configure faster) - All access policies from scratch (Physical domain, virtual domain, VLAN pools, Int Profiles, Int Policies, Switch profiles, etc) - Discover Fex 101 and Fex 102 (DC3) - Create new Tenant from scratch, with EPGs to migrate , and with EPGs to discover - create a lot of contracts from scratch, with different filters - Create BD1, BD2, and VRF1 - Create a VPC peer between L101 and L104, to be used for a port-channel from N7k VDC called 3…. - Create an L3Out using SVI 199, and make sure adjacency forms in Nexus 7k - Create an L2Out - configure 65501 as RR in the Fabric ( ***** only two spines addedd , make sure all spines are considered *******) - make sure that VMs on same EPG do not talk to each other (endpoint security groups?)

Cisco Intelligent WAN (IWAN) The complete guide to Cisco® IWAN: features, benefits, planning, and deployment Using Cisco Intelligent WAN (IWAN), businesses can deliver an uncompromised experience, security, and reliability to branch offices over any connection. Cisco IWAN simplifies WAN design, improves network responsiveness, and accelerates deployment of new services. Now, there’s an authoritative single-source guide to Cisco IWAN: all you need to understand it, design it, and deploy it for maximum value. In Cisco Intelligent WAN (IWAN), leading Cisco experts cover all key IWAN technologies and components, addressing issues ranging from visibility and provisioning to troubleshooting and optimization. They offer extensive practical guidance on migrating to IWAN from your existing WAN infrastructure. This guide will be indispensable for all experienced network professionals who support WANs, are deploying Cisco IWAN solutions, or use related technologies such as DMVPN or PfR. Deploy Hybrid WAN connectivity to increase WAN capacity and improve application performance Overlay DMVPN on WAN transport to simplify operations, gain transport independence, and improve VPN scalability Secure DMVPN tunnels and IWAN routers Use Application Recognition to support QoS, Performance Routing (PfR), and application visibility Improve application delivery and WAN efficiency via PfR Monitor hub, transit, and branch sites, traffic classes, and channels Add application-level visibility and per-application monitoring to IWAN routers Overcome latency and bandwidth inefficiencies that limit application performance Use Cisco WAAS to customize each location’s optimizations, application accelerations, and virtualization Smoothly integrate Cisco WAAS into branch office network infrastructure Ensure appropriate WAN application responsiveness and experience Improve SaaS application performance with Direct Internet Access (DIA) Perform pre-migration tasks, and prepare your current WAN for IWAN Migrate current point-to-point and multipoint technologies Download: Mirror: READ THE RULES BEFORE POSTING POST IN [Offer] / [REQ] section only

Hello Community, I want to renew my CCIE and it would be great if anyone can share exam dumps. Thanks in advance.

As Cisco recently annouced free mobile lab for CCIE/CCDE candidates but the locations were limited. They have added more locations in the list. Registrations are open as well. If anyone is willing to take the exam in next year, you can take this as a demo exam or 1st free attempt l. See the link for more details - UPDATED LIST OF LOCATIONS AND EXAM DATES ORIGINAL ANNOUNCEMENT

Dears, please share details if someone has Lab Exam Voucher

I heard that the questions on the DC CCIE lab changed in march, does someone know if there's updated dumps available?

CCIE LAB Exam Voucher available i.e. Fully Discountable worth 1600USD each Letting them go for 1000USD PM Me if interested.

Hi CC Folks Has anyone lately took the (300-510 SPRI) exam and had a Valid Dumb for it Kindly ?? Kind Regards

Hello, Can someone please share with test engine for 350-401 There is chinesedumps test engine, shared by @enterprise, but it's expired already. Thank you.

Guys, I have one CCIE lab exam voucher available. PM me if you need it at discount price.

I have on voucher code for CCIE LAB . IF anyone interested PM me . I will give with discount price.