Search the Community

CCIE - Collections [hide][Hidden Content]]

CCIE - Collections [hide][Hidden Content]]

send me your contact if interested , and pls dont write directly your contacts people gonna use your informations so pls be carefull

Free Download Cisco CCNP / CCIE Enterprise Core Training | 350-401 ENCOR Published 12/2023 Created by Yavuz BULUT MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch Genre: eLearning | Language: English | Duration: 117 Lectures ( 11h 23m ) | Size: 11.3 GB By taking this training, you can easily pass the Cisco CCNP and CCIE Enterprise Core 350-401 ENCOR exam. What you'll learn: Layer 2 Packet Forwarding Layer 3 Packet Forwarding Cisco Express Forwarding - CEF Virtual Router Forwarding - VRF Multiple Spanning Tree Protocol - MST Virtual Trunking Protocol - VTP EIGRP Routing Protocol OSPF ve Advanced OSPF Routing OSPF v3 Border Gateway Protocol - BGP Software-Defined WAN | SD-WAN Software-Defined Access | SD-Access Requirements: You must have taken Cisco CCNA 200-301 Network Training. If you took the CCNA Training in the pre-2020 version or if your knowledge is not current, I recommend that you repeat the CCNA topics and start this training that way. Description: Cisco certificates are among the most valid certificates in the world, and by taking this training, you can easily pass the Cisco CCNP and CCIE Enterprise 350-401 ENCOR exam. Once you pass the exam and receive your certificate, you will always be one step ahead in your job applications.The content of the training has been prepared with completely new topics, with reference to the Cisco CCNP and CCIE Enterprise 350-401 ENCOR Official book prepared by Cisco. You can also download English source files, approximately 400 pages, from the downloadable source files.To participate in the training, you must have taken the Cisco CCNA Network training. If you took the CCNA training in the pre-2020 version, I recommend that you start this training after taking the new Cisco CCNA 200-301 Network Training again.We will do the laboratory applications in the training with the Eve-NG Network simulation program. I will explain in detail how to download the program and how to use it.I tried to convey this training to you in the best way possible with my 25 years of experience in the sector. I had great fun while preparing the training, and I have no doubt that you will enjoy watching it too.In order to provide you with the best sound quality, I used a quality microphone while shooting.If you watch videos in Auto mode, you can watch them in 1080P if your screen resolution and internet speed are sufficient.The content of the training has been prepared with completely new topics, with reference to the Cisco CCNP and CCIE Enterprise 350-401 ENCOR Official book prepared by Cisco. You can also download Turkish presentation files, approximately 400 pages, from the downloadable files. Who this course is for: Network Engineers Network Experts Information Technology Consultant Homepage [Hidden Content] Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live [Hidden Content] No Password - Links are Interchangeable

Free Download Cisco CCNP / CCIE Enterprise Core Training | 350-401 ENCOR Published 12/2023 Created by Yavuz BULUT MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch Genre: eLearning | Language: English | Duration: 117 Lectures ( 11h 23m ) | Size: 11.3 GB By taking this training, you can easily pass the Cisco CCNP and CCIE Enterprise Core 350-401 ENCOR exam. What you'll learn: Layer 2 Packet Forwarding Layer 3 Packet Forwarding Cisco Express Forwarding - CEF Virtual Router Forwarding - VRF Multiple Spanning Tree Protocol - MST Virtual Trunking Protocol - VTP EIGRP Routing Protocol OSPF ve Advanced OSPF Routing OSPF v3 Border Gateway Protocol - BGP Software-Defined WAN | SD-WAN Software-Defined Access | SD-Access Requirements: You must have taken Cisco CCNA 200-301 Network Training. If you took the CCNA Training in the pre-2020 version or if your knowledge is not current, I recommend that you repeat the CCNA topics and start this training that way. Description: Cisco certificates are among the most valid certificates in the world, and by taking this training, you can easily pass the Cisco CCNP and CCIE Enterprise 350-401 ENCOR exam. Once you pass the exam and receive your certificate, you will always be one step ahead in your job applications.The content of the training has been prepared with completely new topics, with reference to the Cisco CCNP and CCIE Enterprise 350-401 ENCOR Official book prepared by Cisco. You can also download English source files, approximately 400 pages, from the downloadable source files.To participate in the training, you must have taken the Cisco CCNA Network training. If you took the CCNA training in the pre-2020 version, I recommend that you start this training after taking the new Cisco CCNA 200-301 Network Training again.We will do the laboratory applications in the training with the Eve-NG Network simulation program. I will explain in detail how to download the program and how to use it.I tried to convey this training to you in the best way possible with my 25 years of experience in the sector. I had great fun while preparing the training, and I have no doubt that you will enjoy watching it too.In order to provide you with the best sound quality, I used a quality microphone while shooting.If you watch videos in Auto mode, you can watch them in 1080P if your screen resolution and internet speed are sufficient.The content of the training has been prepared with completely new topics, with reference to the Cisco CCNP and CCIE Enterprise 350-401 ENCOR Official book prepared by Cisco. You can also download Turkish presentation files, approximately 400 pages, from the downloadable files. Who this course is for: Network Engineers Network Experts Information Technology Consultant Homepage [Hidden Content] Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live [Hidden Content] No Password - Links are Interchangeable

Hi, if anyone have "ACI Advanced Monitoring and Troubleshooting Book by Carlo Schmidt, Joseph Ristaino, and Sadiq Memon" please share Thanks

Dears please can some one share the Niriz Sharma bootcamp CCIE DC. Thanks and Best Regards

Result Failed ==== I used vendor sp*t*, they also don't have the solution for the new lab exam. so no point to buy from them ==== Feedback Design: 40% old Design ALL new questions about Hyperconverged vs Converged Systems, about UCS Director multi node deployment, about ACI considerations, ======================================================== Feedback about Deploy, Operate and Optimize all new questions, only about 10% like old DOO Topology is “almost” the same, but the connectivity in ACI with Nexus is different (L2out, new L3out with SVI, VPC, and L2 ports only (******** access to vCenter and DCNM is obtained by configuring stuff correctly, otherwise you do not get access to both consoles) Section 1: - VPC but with new considerations (delay restore, Active Switch, etc) - Troubleshoot OSPF (the process is called DATACENTER, and in some ports it shows as DATACENTER1, DC1, MTU misconfiguration in some ports, network types) etc; - tricky multicast question about not using shared trees with IP 100.0.0.1, in DC1 and DC2 —— two loopback in the environment (N9k-DC1 and N9k-DC2) use this same IP already (Lo100) - nothing configured for VXLAN EVPN multisite (for a session that is slow this is a killler as there is a lot to configure for BGP, VXLAN, etc). maybe use DCNM to deploy quickly the fabric for DC1 and DC2? this involves 3 questions: all BGP configs, configure vxlan and nve1, multicast - question about configuring syslog with level 5 only - configure NTP on N5ks in DC1, N5k-1 configured as NTP Server, and N5k-2 configured as NTP client - using DCNM, configure only a policy for DC1 and DC2 - N9k-DC2 change a python script located at /bootflash/changepython.py (do not forget to save the script) - Access to N7k is through VDC admin — there are 4 VDCs in DC1 named as 1, 2, 3, and 4 (you have to find which one is connected to N5ks and N9ks); there are 3 VDCs in DC2 named as 1, 2, 3 (you have to find which one is connected to N9k-DC2, and which to ACI, L2Out, L3out with SVI, VPC, etc) Section2: - Discover the UCS has an issue, server ports for IOM-A shows as either disconnected or down, spent a lot of time trying to figure out if it was a config issue (proctor said the questions indicate but did not found the issue) — hence this affected the whole solutions as IOM-A was never discovered - Monitor vhbas on service profiles using int 1/32 on the Fabric Interconnects - full L2 disjoint solution, as vlan 101-104 have to use the port-channels going to Nexus 5k1 and N5k-2, and VLANs 10, 20, 30 and 40 have to be transmitted to N5k-3 and Nk-4 (unified port instead of FCoE port) - Troubleshoot SP1 assigned to Server 2, (as there was a path missing because of IOM-A not discovered other issues showed up, such as path not available, etc). the issue to troubleshoot is RAID configuration). all policies and SP template for this SP are in place - create new policies to troubleshoot SP2 ( you have to clone SP1 to SP2, then SP2 is assigned to Server 1, this is the one to boot from SAN, most of configs are in place, but you have to create new ones, WWPN 10 and 11 still apply) - create zoning from scratch so that SP2 boots from SAN (remember, as there was an issue discovering IOM-A even though you config correctly you will be missing a path to boot disk if you did not solve the Server Port issues) …. new vsan numbers vsan 50 and vsan 60; ports are shut in both N5k3 and N5k4, and FI-A and FI-B - create new policies (like network control and others) - Section3: (all new here, all from scratch, so probably a strategy to configure faster) - All access policies from scratch (Physical domain, virtual domain, VLAN pools, Int Profiles, Int Policies, Switch profiles, etc) - Discover Fex 101 and Fex 102 (DC3) - Create new Tenant from scratch, with EPGs to migrate , and with EPGs to discover - create a lot of contracts from scratch, with different filters - Create BD1, BD2, and VRF1 - Create a VPC peer between L101 and L104, to be used for a port-channel from N7k VDC called 3…. - Create an L3Out using SVI 199, and make sure adjacency forms in Nexus 7k - Create an L2Out - configure 65501 as RR in the Fabric ( ***** only two spines addedd , make sure all spines are considered *******) - make sure that VMs on same EPG do not talk to each other (endpoint security groups?)

Does anyone have lab CCIE Routing & Switching Written on Networksessions: CCIE Routing & Switching Written Course - NetworkLessons.com Thanks and Best regard.

Hello Community, I want to renew my CCIE and it would be great if anyone can share exam dumps. Thanks in advance.

I need ccie service provider v5.0 by ine. if someone have it please help me by giving the data. thanks

Dears, please share details if someone has Lab Exam Voucher

Cisco Certified DevNet Professional DEVCOR 350-901 PDF, 2023 by Jason Davis G Drive link Cisco Certified DevNet Professional DEVCOR 350-901 Official Cert Guide presents you with an organized test preparation routine using proven series elements and techniques. "Do I Know This Already?" quizzes open each chapter and enable you to decide how much time you need to spend on each section. Exam topic lists make referencing easy. Chapter-ending exam preparation tasks help you drill on key concepts you must know thoroughly. * Understand and apply Cisco Certified DevNet Professional (DEVCOR 350-901) exam topics * Assess your knowledge with chapter-opening quizzes * Review key concepts with exam preparation tasks * Practice with realistic exam questions in the practice test software

Lab book + Extra Files; Final published release in original PDF format, 2023; Google drive link below Update: added solutions, topo, Eve files Every lab scenario includes full solutions and in-depth explanations: read these as you practice, or solve on your own, and compare your results with the author’s. Either way, you’ll gain indispensable insight for applying theory to practice in real-world environments---including your CCIE Labs. Master core Layer 2 switching concepts, including STP, RSTP, MSTP, VTP, VTP Pruning, 802.1Q, ISL Trunking, LACP, and PagP Master route filtering with IP Prefix-lists Gain a rock-solid understanding of RIPv2, the Cisco Enhanced Interior Gateway Routing Protocol (EIGRP), and classic Open Shortest Path First (OSPF) routing Understand Border Gateway Protocol (BGP), the protocol that routes the Internet Review the Cisco Dynamic Multipoint VPN (DMVPN) from the ground up, overlays/underlays, configurations, switching enhancements, network design, tunneling, and more Master MPLS and the suite of services it can provide: L3VPNs and beyond Make the most of IPv6: master address types, assignment, configuration, NDP, SLAAC, and IPv6-enabled DMVPN, OSPFv3, EIGRP, and BGP Explore the Cisco latest SD-WAN platform, from basic components to WAN edge devices and app-aware Policies Understand the Cisco SD-Access (SDA) solution for creating scalable, automated, and resilient enterprise fabrics

CCIE Practice Labs from C1sco or via CLN - The new CCIE Practice labs let you explore fully functional, hands-on lab environments in four-hour sessions. see more info

I heard that the questions on the DC CCIE lab changed in march, does someone know if there's updated dumps available?

CCIE LAB Exam Voucher available i.e. Fully Discountable worth 1600USD each Letting them go for 1000USD PM Me if interested.

[Hidden Content]

Hello Folks i'd like to share with you Cisco 350-401 ENCOR exam dump that i used and passed on 20/01/2022. The file is in VCE format, so i attached the simulator that run it. Please give us like so the post reach the most. VCE file [Hidden Content] Simulator [Hidden Content]

Hi, Maybe someone heard of the new "Cisco Continuing Education Program". The main point is in program that you can get recetification (ccna, ccnp, ccie) without go to exam ! But instead you must attend cisco training. Someone training is free somone you must paid. You must collect some points (credits) from this training to get a recertification. This is describe on the cisco website. [Hidden Content] Anyone know something more about it ? Is it worth joining the program ? Is it worth it or they just wnat more money (with the program) ?

Hello, Can someone please share with test engine for 350-401 There is chinesedumps test engine, shared by @enterprise, but it's expired already. Thank you.

Hi everyone You can find link [hide] [Hidden Content]] thx

Hi CC Folks Has anyone lately took the (300-510 SPRI) exam and had a Valid Dumb for it Kindly ?? Kind Regards

Hi Everyone , if anyone have mentioned content please share it Nokia Network Routing Specialist I (NRS II) Certification Self-Study Guide Nokia Network Routing Specialist II (NRS II) Certification Self-Study Guide Nokia Service Routing Architect (SRA) Certification Self-Study Guide Thanks READ THE RULES ORELSE YOU WILL GET BANNED MISSING [Offer] / [Req]

As Cisco recently annouced free mobile lab for CCIE/CCDE candidates but the locations were limited. They have added more locations in the list. Registrations are open as well. If anyone is willing to take the exam in next year, you can take this as a demo exam or 1st free attempt l. See the link for more details - UPDATED LIST OF LOCATIONS AND EXAM DATES ORIGINAL ANNOUNCEMENT